Remote admin can do the following:

1. Disable itself.
2. Toggle autosetup.
3. Toggle the autoupdate file.
4. Toggle self-pruning of outdated links.
5. Toggle the webstats dump.
6. Change the path to the webstats dump file.
7. Change the max allowed connections value.
8. Add or remove channel creators.
9. Add or remove server admins.
10. Change the infohost URL ( Network website )
11. Change the infourl URL ( Server statdump site )
12. Change the network name the server serves.
13. Reboot the server.
14. Shutdown the server. ( No reboot )
14. Disconnect a mud.
15. Destroy a mud's connection listing.
16. Ban/Unban an IP from the server.
17. Query the server's current configuration. Does not display connection listings.
18. Enable or disable packet compression. Will not toggle compression states on clients already connected.
19. Enable or disable packet debugging on the server. PLEASE watch this. The logs will spam up VERY fast.

Remote admin CANNOT do the following:

1. Change the name of the server.
2. Change the port the server listens on.
3. Change the server's remote admin password.
4. Add new connections.
5. Set the bind IP for the server if it's required.
6. Enable itself ( duh )

Note that if you tell remote admin to disable itself, you will need to edit the server's config
manually and reboot in order to reenable it.

Note also that when setting or removing channel creators and server admins, it is possible to
remove yourself from these lists. If you remove yourself from the server administrators list,
then you will no longer be able to issue remote admin commands to the server until either
another administrator adds you, or you manually edit your server's config file to reinstate yourself.

Remote administration requires the use of a client with SHA-256 Authentication support. If you do not
have such a client, you must either upgrade, or backport the support to your existing client.
The server will not respond in any fashion to a request from a mud that does not support it.

To see the list of available commands for a given server:

imcadmin <servername> list