This is a gamma release of MOBprograms for ROM 2.4. --------------------------------------------------- Date of this release: 28-JAN-1996, v. 0.98g This release contains the following files: README - this file HOWTO - installation instructions MOBPROG.DOC - MOBprograms documentation HACKER.DOC - about the implementation EXAMPLES.DOC - some MOBprogram examples SURRENDER.HLP - supplement to ROM help file dopatch - utility to patch the ROM 2.4b2 sources *.patch - patches to the existing ROM 2.4b2 sources *.c, *.h - new source files The patch in this release works only for ROM 2.4b2. This release has been tested on Linux 1.2.8 (gcc 2.6.3), I have no idea about portability. If you find any bugs or have any suggestions for improvements, e-mail me: markku.nylander@uta.fi Updated patch for Rom2.4b4 for MobPrograms. by KERMiT http://www.cyberspace.com/~kermit/mud/ -------------------------------------------------------------------------- Originally appeared in: Merc release 2.2 Wednesday 24 November 1993 N'atas-Ha natasha@gs118.sp.cs.cmu.edu Kahn Modified for ROM 2.4 in January 1996 Newt@Imperium Gothique TABLE OF CONTENTS The Basic Idea About This Version MOBprogram Syntax Linking MOBprograms Trigger Types Variables Control Flow Syntax Operators If_checks in Control Flow New Commands of Interest Regarding CPU Slowdown Loading Mobiles and Objects Miscellaneous Information -------------------------- Quick Reference Sheet Examples -----------------------------The Basic Idea--------------------------------- Ever wonder why most muds either seem dead or overcrowded? The answer is probably partially due to the fact that the mobiles never do anything but wait to be slaughtered. Unless someone has gone to great lengths and added many special procedures, most mobiles have no idea you are in the room with them and rarely listen to what you say. The typical Midgaard mayor wanders happily along even when the populace pokes him, waves his City Key about, unlocks his gates, or frenchs his secretary, etc. So a way to give the mobiles a bit more spirit would be neat. Enter the MOBprograms. TRIGGERS AND SCRIPTS The backbone of the MOBprograms shall be called triggers from this point on. Essentially, they are procedure calls placed in sneaky places in the mud code which provide the context for what is going on around the mobile. So, if something happens in the mobile's room and a trigger is activated, then a list of commands is sent to the interpreter in the mobile's name, thus making her/it/him do an appropriate something. VARIABLES Since knowing the appropriate response for every mobile to every possible trigger is not easy, this command list shouldnt be a rigid script, but needs to be somehow unique for the mobile and the situation. However, in order to know the situation, a mobile needs to know more about the trigger than that it just happened. So, we have to include some sort of variables as well to set the context appropriately. MOBPROGRAMS VS. SPEC_PROCS As most implementors know, most area creators are not versed in coding, but usually have great ideas. Therefore, whatever system is used needs to be quite simple. This is not to demean creators in anyway. Simply, it is useless to have a powerful system, if the only person able to write anything is someone who finds C coding in general to be exciting and non frustrating. If that is going to be the case, then stick to the special procedures, since there is no bound to what a complex special procedure can accomplish. Yet, from experience working on several muds, most admins and implementors prefer not to be writing one shot spec_procs to satisfy the needs of their creators. Thus, the basic idea: let mobiles react to a myriad of mud events/situations by having them perform a list of commands which can be tailored to the moment through a simple and unintimidating scheme usable by any creator. ---------------------------About This Version------------------------------- My implementation of MOBprograms owes a lot to the original MOBprogram code by Natasha. However, having heard reports about unstability of the code supplied, and because the code seemed unnecessarily complex to me, I decided to rewrite the MOBprogram driver. Admittedly, I have dropped out several features that were present in the original version, such as reacting to several triggers at once and string comparison in if_checks. On the other hand, the MOBprogram code has been simplified and made more stable (there are no memory leaks), and several new if_checks and MOBcommands have been added. The system of linking MOBprograms to mobiles has been changed to allow procedure-like calls. This version is an adaptation of my earlier MOBprogram system I created for Imperium Gothique MUD. The IG system has object and room programs as well, but I chose to omit them from this version. -- Newt ----------------------------MOBprogram Syntax-------------------------------- The simplest way to describe any syntax is by example, so here goes. First, define the notation: anything contained in braces {} is required, anything in brackets [] is optional, anything in quotes "" is a case insensitive literal, NL refers to a required new-line. The meanings of the labels used will be described following the syntax diagram. To use MOBprograms, you must add a #MOBPROGS section(s) to your area file(s). Section syntax: #MOBPROGS #{Vnum} {program_command_1} NL {program_command_2} NL {program_command_3} NL . . . {program_command_N} NL "~" NL . . . #0 -- Explanations A VNUM is the MOBprogram virtual number that identifies the program the number must be unique across area files (like mobile and object vnums). A PROGRAM_COMMAND can be any legal mud command, or a control flow command. NOTE 1: Any whitespaces (space, tab, newline) are NOT stripped from the programs when loading the database (why? because I'm too damn lazy to have implemented it). Thus, to save memory and execution time, omit all unnecessary spaces from your MOBprogram scripts. If you must have indentation, use TAB. NOTE 2: MOBprograms do NOT have to be in the same area file as the mobile definitions, since the programs are linked to the mobiles after the database has been loaded. A MOBprogram can also be used as a subroutine (see MOB CALL command) without having to be linked to any mobile. -- Example #MOBPROGS #3001 say Hey, no loitering! poke $n ~ #0 --------------------------Linking MOBprograms-------------------------------- Once you've written your MOBprograms, you must link the programs to appropriate mobiles. In the #MOBILES section, for each mobile you wish to have a MOBprogram, add lines of the following type to the end of the mobile definition: "M" {Keyword} {Vnum} {Argument}~ NL --Explanations The KEYWORD is a single word, see below for explanations. The VNUM is the MOBprogram virtual number. The ARGUMENT is the argument that triggers the event. --Example M act 3001 sits down~ In the above example, an ACT trigger is defined. When the mobile sees someone sitting down in the room, the mobile will execute program number 3001 (defined in #MOBPROGS section). NOTE: Several mobiles can use the same MOBprogram, i.e. MOBprograms can be SHARED with several mobiles. The keyword and trigger argument can be different for each mobile even if they share the same MOBprogram code. -----------------------------Trigger Types---------------------------------- Here's a summary of triggers: Triggers are fairly easy to add, but this basic list should hold for most needs. Their names, argument list syntaxes, and translation into more articulate english are given below: ACT Keyword : 'act' Argument: string The argument is a phrase, a text string. The trigger is activated whenever the phrase is contained in the act() message. NOTE: Most general trigger. Applies to almost every event which happens in the mud. Anytime the function act() is called with a message to be delivered TO_CHAR,TO_VICT,TO_ROOM,etc. the act can be triggered. Basically this will trigger on almost everything you'll ever want. Output of "say", "shout" and "emote" do not trigger this event. SPEECH Keyword : 'speech' Argument: string NOTE: This is only triggered when the phrase is contained in a message which has been said by a PC in the same room as the mob. The PC restriction is not necessary, but makes infinite loops between two talking mobiles impossible. It also makes it impossible for two NPC's to stand and discuss the weather however. RANDOM Keyword : 'random' Argument: number The argument is a number betweeen 0 and 99 inclusive. NOTE: This trigger is checked at each PULSE_MOBILE and if the argument is greater than a percentage roll the trigger is activated. This will happen even if there is no PC in the room with the mob, but there must be players in the same area. It is useful to give mobiles a bit of a personality. For instance a janitor who stops to spit tobacco, or complain about the hours, or wonder why there are no woman janitors on muds, or a fido which barks or growls or pees on the curb is much more alive than one which just sits there scavenging. Note that this trigger is checked only when there are players in the area. If you want this event to be triggered always, you must set the ACT_UPDATE_ALWAYS flag of the mobile. GREET/GREET ALL Keyword : 'greet' Argument: number Again a percentage argument. NOTE: Whenever someone enters the room with the mobile, and the mobile saw the person enter, this is checked. Good for shopkeepers who want to welcome customers, or for pseudo-aggressive mobiles which need to discriminate on who they attack. Greet trigger activates only when the mobile is not busy (fighting, sitting, sleeping etc.). If you want to be sure to catch all players, use grall. Keyword : 'grall' Argument: number Again a percentage argument. NOTE: Like greet, but it can be triggered even if the mobile didn't see the arrival (i.e. sneak, invis, etc) or is busy. Most useful for faking teleport rooms or for impassable guardians. ENTRY Keyword : 'entry' Argument: number Again a percentage argument. NOTE: The opposite of greet trigger. Whenver the mobile itself enters a new room, this can be triggered. Useful for looking around, or waving or other things that real PCs do when they arrive at a crowded room. IMPORTANT: In an entry program, the mobile can only refer to a random pc ($r in if checks) -- there's no way to know how many PCs exist in the room the mobile enters! Also, you must check visibility of the target in your program. EXIT/EXIT ALL Keyword : 'exit' Argument: number Argument is the exit number (0:north, 1:east, 2:south 3:west etc.) NOTE: The opposite of entry trigger. This is activated when PC tries to leave a room through an exit indicated by the argument, and the mobile sees the person leave. Useful for having a single guardian to watch several exits. An exit trigger works better than an entry trigger, since you can refer to a specific PC instead of a random PC. IMPORTANT: If this event is triggered, the victim will not move through the exit. If necessary, you must move the character yourself in your program (see MOB TRANSFER/MOB GTRANSFER). Also, this event is not triggered when a character flees from combat or the mobile is not in its default position. Keyword : 'exall' Argument: number Argument is the exit number (0 = north etc.) The same as exit trigger, but it can be triggered even if the mobile cannot see the person trying to leave the room or if the mobile is busy. GIVE Keyword : 'give' Argument: string or object vnum The argument is either the a string containing words to be matched against the keywords of the object, or the word "all"; e.g. argument "long sword" will match to objects "long bow" and "small sword". Alternatively, the argument can be the virtual number of a single object. NOTE: This is triggered whenever something is given to the mobile. Best used for quests. Since the first successful trigger is the only one of this type which is processed, having an "all" argument in the script at the end of the MOBprogram list is essentially a default response. BRIBE Keyword : 'bribe' Argument: number The argument is any positive integer number. NOTE: This trigger is activated whenever money is given to the mobile. If the amount given exceeds the number, then process the commands. Note again, that an argument of '1' would act as a default response. Also note that if the script is not triggered (because of too little money having been given), the mobile still keeps the money... ROM 2.4 NOTE: Since ROM 2.4 has two different types of currency (gold and silver coins), for bribe trigger the amount to be given is converted to silver coins with the rate of 1 gold = 100 silver. Thus, the number in the argument should be the expected amount in silver coins. KILL Keyword : 'kill' Argument: number The argument is a percent once again. NOTE: This trigger is checked whenever a PC attacks the mobile. The check occurs only ONCE, in the beginning of combat. Useful for summoning assistance etc. (See MOB MLOAD). FIGHT Keyword : 'fight' Argument: number The argument is a percentage. NOTE: Useful for giving mobiles combat attitude. It is checked every PULSE_VIOLENCE when the mobile is fighting. Can be used to cast spells (see MOB CAST), curse at the opponent, or whatever. Only the first successful one will be processed to save time. Also, this means that the mobile wont get lucky and 1. curse, cast a fireball and 2. spit on the player, cast another fireball in the same pulse. HIT POINT PERCENTAGE Keyword : 'hpcnt' Argument: number The argument is a percentage. NOTE: Is activated at each PULSE_VIOLENCE when the mobile is fighting. It checks to see if the hitpoints of the mobile are below the given percentage. Multiple hpcnt triggers should be listed in increasing order of percent since a 40% will always be activated before a 20% and, only the first successful trigger is performed. (See also MOB FLEE). DEATH Keyword : 'death' Argument: number The argument is a percent once again. NOTE: When the mobile dies, if the random percentage is less than the argument the mobile performs the MOBprogram commands rather than the usual death_cry() sequence. This is done before the corpse is made, so the commands can be considered the mobiles last gasp. It could perhaps destroy the items it was holding (see MOB REMOVE and MOB JUNK), or create some (see MOB OLOAD), or cast a spell (see MOB CAST) on the killer and the room, or even goto a new location (see MOB GOTO) and die there (with a text message, the corpse would seem to vanish) The position of the mobile is set to STANDING, and so it can do all the normal commands, without worrying about being DEAD. However, even if the mobile restores itself to full hitpoints, it will still die. This is not a way to immortal mobiles. However, the last thing this mobile does could be to goto some vacant room, load a fresh version of itself, drop all its items, force the new mobile to get all the items and wear them, send the new mobile back to the character who killed it and force the new mobile to attack that character. Along with a text message which said the mobile restored itself, this might be a convincing effect. (Note that your kitten could turn into a dragon this way too). DELAY Keyword : 'delay' Argument: number The argument is a percentage chance. NOTE: This trigger activates when the delay of a mobile (set with the MOB DELAY command) expires. This trigger can be used to create staged mobile behavior, for example, a guardian could see a player entering a room, give a warning and activate a delay. If the player is still present when the delay expires, the guard would attack the player. (See also MOB REMEMBER). A mobile can have several delay triggers, but every time the delay timer expires, all the triggers are checked and the first successful one executed. SURRENDER Keyword : 'surr' Argument: number The argument is a percentage. NOTE: This trigger activates when the mobile is fighting and the opponent issues a "surrender" command. When triggered, both parties will cease fighting, and the mobile can accept the surrender (perhaps taking all equipment from the character with MOB REMOVE). Note that if the mobile does not accept the surrender, it must resume fighting with MOB KILL. If a character surrenders and the mobile does not have a surrender trigger, or the trigger does not activate, the fight resumes normally. NOTE: No MOBprograms will be successful when the mobile is charmed (since it has no self volition, it should act like it has none) to protect mobiles which are given special powers from being implemented by a player. ------------------------------Variables------------------------------------ To make things come alive, variables are needed. These are represented in the MOBprograms by using a dollar sign convention as in the socials. When the mud command is processed, these variables are expanded into the values shown below. Usually, it is best to use the short descriptions of mobiles and the names of players when speaking them, but if you are performing an action to someone almost always you want the name. The title field for players is an extra that probably wont often be used. Without further hesitation... the variables: $i the first of the names of the mobile itself. $I the short description of the mobile itself. $n the name of whomever caused the trigger to happen. $N the name and title of whomever caused the trigger to happen. $t the name of a secondary character target (i.e A smiles at B) $T the short description, or name and title of target (NPC vs PC) $r the name of a random PC in the room with the mobile $R the short description, or name and title of the random PC $q the name of the MOBprogram target (see MOB REMEMBER) $Q the short description of the MOBprogram target $j he,she,it based on sex of $i. $e he,she,it based on sex of $n. $E he,she,it based on sex of $t. $J he,she,it based on sex of $r. $k him,her,it based on sex of $i. $m him,her,it based on sex of $n. $M him,her,it based on sex of $t. $K him,her,it based on sex of $r. $l his,hers,its based on sex of $i. $s his,hers,its based on sex of $n. $S his,hers,its based on sex of $t. $L his,hers,its based on sex of $r. $o the first of the names of the primary object (i.e A drops B) $O the short description of the primary object $p the first of the names of the secondary object (i.e A puts B in C) $P the short description of the secondary object Also, in if_checks, the accepted variables are the basic ones (i,n,t,r,o,p,q). If a variable is referenced that doesnt exist, then the value is simply left blank or replaced with "someone"/"something" in output (i.e referring to $o when the trigger is: A kisses B) If variable $q has not been defined, it is automatically set to the last player that has triggered the program being executed (i.e. variable $n). Once $q has been defined, it can be modified with MOB REMEMBER and MOB FORGET commands in a program. Variable $q lets the mobile "remember" a player across different programs, which can be useful. Note that $q is set automatically only the FIRST TIME the mobile executes a program, every time thereafter it must be set with MOB REMEMBER. The only problem with the variables is that the secondary object and the secondary target are passed by act() in the same location. This means that if you reference $t in an A puts B in C situation, the result will probably be a happy mud crash or some weird side effect, espescially if $t is used in an if_check (i.e. if isnpc($t) in the above situation) The basic fix for this is to change everyone who calls the act() procedure to specify a secondary object and a secondary character. But that is a fairly comprehensive trivial twiddle, so we left it the way it is so that, you arent forced to make all those twiddles to use the MOBprograms. ---------------------------Control Flow Syntax------------------------------ In place of any legal mud command in a MOBprogram, one can substitute a flow of control command. Here is the syntax for a flow of control command. The parts between [ and ] are optional. "if" " " {if_check_1} {argument} [ {operator} {value} ] NL [ "or" " " {if_check_2} {argument} [ {operator} {value} ] NL ] [ "or" " " {if_check_N} {argument} [ {operator} {value} ] NL ] . . . [ "and" " " {if_check_N} {argument} [ {operator} {value} ] NL ] [ "and" " " {if_check_N} {argument} [ {operator} {value} ] NL ] . . . [ {program_command_1} NL ] [ {program_command_2} NL ] . . . [ "break" NL ] . . . [ {program_command_N} NL ] [ "else" NL ] [ {program_command_1} NL ] [ {program_command_2} NL ] . . . [ "break" NL ] . . . [ {program_command_N} NL ] "endif" NL Basically, it is: an 'if' line, followed by zero or more 'or' lines, followed by zero of more 'and' lines ('and' and 'or' lines can be in any order) followed by zero or more legal mud commands, which may contain a 'break' line, possibly followed by an 'else' line , followed by zero or more legal mud commands, which may contain a 'break' line, followed by an 'endif' line. The only new syntax labels are all in the IF/OR/AND line: --Explanations An IF_CHECK is a string which describes under what context to compare things. The ARGUMENT is the reference point from which the LHS of an expression comes. The OPERATOR indicates how the LHS and RHS are going to be compared. The VALUE is the RHS of the expression to be compared by the operator. The BREAK command bails out of the entire MOBprogram regardless of the level if nesting. (END is a synonym for BREAK). If that looks confusing, skip to the end of the document and review the examples. Hopefully that should clear things, otherwise you'll probably have to give me a mail since examples are the best way I know to explain syntax. --------------------------------Operators----------------------------------- Most of the basic numeric operators are legal and perform the same function as in C. Operators: == != > < >= <= ------------------------If_Checks In Control Flow--------------------------- The provided list of if_checks and their arguments are below. They should all be fairly obvious in what they do, but some of the more obtuse deserve a slight explanation. Any '==' operator can be replaced with any of the available ones described above. The argument $* refers to any of the variables which make sense for that if_check (i.e. for an if_check which is referencing a person the only valid variables would be $i, $n, $t, $r or $q) A value type of string is a sequence of characters. It does not need to be included in quotes or anything like that (i.e. if name $n fido ) There are five types of if checks: Type 1: Keyword and value rand num Is random percentage less than or equal to num mobhere vnum Is a NPC with this vnum in the room mobhere name Is a NPC with this name in the room objhere vnum Is an object with this vnum in the room objhere name Is an object with this name in the room mobexists name Does NPC 'name' exist somewhere in the world objexists name Does object 'name' exist somewhere in the world Type 2: Keyword, comparison and value people == integer Is the number of people in the room equal to integer players == integer Is the number of PCs in the room equal to integer mobs == integer Is the number of NPCs in the room equal to integer clones == integer Is the number of NPCs in the room with the same vnum as the NPC who activated the program equal to integer order == integer Is the order (of several similar NPCs) of the NPC who activated the trigger equal to integer hour == integer Is the hour (game time) equal to integer Type 3: Keyword and actor isnpc $* Is $* an NPC ispc $* Is $* a PC isgood $* Does $* have a good alignment isneutral $* Does $* have a neutral alignment isevil $* Does $* have an evil alignment isimmort $* Is $* an immortal (level of $* > LEVEL_HERO) ischarm $* Is $* affected by charm isfollow $* Is $* a follower with their master in the room isactive $* Is $*'s position > POS_SLEEPING isdelay $* Does $* have a delayed MOBprogram pending isvisible $* Is $* visible to NPC who activated the program hastarget $* Does $* have a MOBprogram target in the room istarget $* Is $* the target of NPC who activated the program Type 4: Keyword, actor and value affected $* 'affect' Is $* affected by 'affect' act $* 'act' Is $*'s ACT bit 'act' set off $* 'off' Is $*'s OFF bit 'off' set imm $* 'imm' Is $*'s IMM bit 'imm' set carries $* 'name' Is $* carrying object 'name' wears $* 'name' Is $* wearing object 'name' has $* 'type' Does $* have object of item_type 'type' uses $* 'type' Is $* wearing object of item_type 'type' name $* 'name' Is $*'s name 'name' pos $* 'position' Is $*'s position 'position' (sleeping etc.) clan $* 'name' Does $* belong to clan 'name' race $* 'name' Is $* of race 'name' class $* 'name' Is $*'s class 'name' objtype $* 'type' Is $*'s item_type 'type' Type 5: Keyword, actor, comparison and value vnum $* == integer Is $*'s virtual number equal to integer hpcnt $* == integer Is $*'s hitpoint percentage equal to integer room $* == integer Is vnum of the room $* is in equal to integer sex $* == integer Is $*'s sex equal to integer level $* == integer Is $*'s level equal to integer align $* == integer Is $*'s alignment equal to integer money $* == integer Does $* have money (in silver) equal to integer objval# $* == integer Is $*->value[#] equal to integer (# from 0-4) NOTE: The original MERC 2.2 MOBprograms used parenthesis '(' and ')' around variables. In this version, they are not allowed. Also,parameters MUST BE separated with spaces (if level $n<10 is NOT valid, correct syntax is: if level $n < 10). ------------------------New Commands Of Interest----------------------------- 1. GENERAL COMMANDS Syntax: SURRENDER This command can be issued in combat. If the one giving the command is a PC and the opponent is a NPC, the NPC will be checked for a surrender trigger. If the trigger activates, the fight will be terminated. Otherwise the combat will resume normally. Note that the mobile can resume the combat in the MOBprogram (see MOB KILL). If anyone (PC or NPC) surrenders to a PC, the combat will terminate. The PC can resume the combat with 'kill' command. With this command, and the use of surrender trigger, non-lethal combat can be implemented (arenas etc.). 2. DIAGNOSTIC COMMANDS These two new commands are available to immortal players. Syntax: MPSTAT [mobile] Displays the triggers and MOBprogram vnums defined for the mobile. Syntax: MPDUMP [vnum] Displays the MOBprogram code of given vnum. 3. MOBCOMMANDS MOBcommands are special commands that allow mobiles to perform immortal-like actions within a MOBprogram (transferring players or loading items, for example). Most MOBcommands them are wiz commands which have been changed to allow for mobiles to perform the commands. In this version of MOBprograms, players have been prevented from using these commands by adding a separate interpreter for MOBcommands. This also speeds up (in most cases) MOBprogram execution when MOBcommands are used. All MOBcommands are preceded with the word 'MOB' on the command line. Syntax: MOB ASOUND [string] MOB ZECHO [string] MOB GECHO [string] ASOUND prints the text string to the rooms around the mobile in the same manner as a death cry. This is really useful for powerful aggressives and is also nice for wandering minstrels or mobiles like that in concept. ZECHO prints the string to all players in the same area with the mobile. GECHO prints the string to all players in the game. Syntax: MOB ECHO [string] MOB ECHOAT [victim] [string] MOB ECHOAROUND [victim] [string] ECHO displays the string to everyone in the room. ECHOAT displays the string to the victim only. ECHOAROUND displays the string to everyone except the victim. The three options let you tailor the message to goto victims or to do things sneaky like having a merchant do: mob at guard mob echoat guard rescue_please This coupled with a guard act trigger on rescue_please to: mob goto $n mob echo $I has arrived. It is an affective way of quickly bringing guards to the scene of an attack. (Note that the merchant has to be the only one of its kind in the game or have a unique name, otherwise the guard might go to different mobile...). Syntax: MOB MLOAD [vnum] MOB OLOAD [vnum] [level] {'room'|'wear'} MLOAD creates a mobile and places it in the same room with the mobile. OLOAD loads the object into the inventory of the mobile. Even if the item is non-takable, the mobile will receive it in the inventory. This lets a mobile distribute a quest item or load a key or something. The optional 3rd parameter can be specified; 'room' means to load the object to the room, 'wear' means to force the mobile to wear the object loaded (useful for equipping mobiles on the fly). Syntax: MOB KILL [victim] Lets a mobile kill a player without having to murder. Lots of MOBprograms end up with mpkill $n commands floating around. It works on both mobiles and players. Syntax: MOB FLEE Causes a mobile to unconditionally flee from combat. Can be used for example with the hit point percentage trigger to simulate "wimpy" behavior. Syntax: MOB REMOVE [victim] [vnum|'all'] Lets the mobile to strip an object of given vnum from the victim. Objects removed are destroyed. If the vnum is replaced with "all", the whole inventory of the victim is destroyed. This command is probably most useful for extracting quest items from a player after a quest has been completed. Syntax: MOB JUNK [object] Destroys the object refered to in the mobile's inventory. It prints no message to the world and you can do things like junk all.bread or junk all. This is nice for having janitor mobiles clean out their inventory if they are carrying too much (have a MOBprogram trigger on the 'full inventory') Syntax: MOB PURGE [argument] Destroys the argument from the room of the mobile. Without an argument the result is the cleansing of all NPC's and items from the room with the exception of the mobile itself. However, mppurge $i will indeed purge the mobile, but it MUST be the last command the mobile tries to do, otherwise the mud cant reference the acting mobile trying to do the commands and bad things happen. Syntax: MOB AT [location] [command] Perfoms the command at the designated location. Very useful for doing magic slight of hand tricks that leave players dumbfounded.. such as metamorphing mobiles, or guard summoning, or corpse vanishing. Syntax: MOB GOTO [location] Moves the mobile to the room or mobile or object requested. It makes no message of its departure or of its entrance, so these must be supplied with echo commands if they are desired. Syntax: MOB TRANSFER [victim|'all'] [location] MOB GTRANSFER [victim] [location] MOB OTRANSFER [object] [location] Sends the victim to the destination or to the room of the mobile as a default. if the victim is "all" then all the characters in the room of the mobile are transfered to the destination. Good for starting quests or things like that. There is no message given to the player that it has been transfered and the player doesnt do a look at the new room unless the mob forces them to. Gtransfer works like transfer, except that the group the victim belongs to is transferred with the victim. Otransfer transfers an object in the room. Syntax: MOB FORCE [victim|'all'] [command] MOB GFORCE [victim] [command] MOB VFORCE [vnum] [command] Forces the victim to do the designated command. The victim is not told that they are forced, they just do the command so usually some mpecho message is nice. You can force players to remove belongings and give them to you, etc. The player sees the normal command messages (such as removing the item and giving it away in the above example) Again, if the victim is "all" then everyone in the mobiles room does the command. Gforce works like force except that it affects the group the victim belongs to. Vforce affects all mobiles with given vnum in the game world. This is useful for, for example, purging certain type of NPCs from the game (by forcing them to purge themselves). Syntax: MOB CAST [spell] [victim] Lets the mobile to cast spells. Beware, this does only crude validity checking and does not use up any mana. All spells are available regardless of the race or other abilities of the mobile. Casting the spell occurs silently, but spell effects are displayed normally. Syntax: MOB DAMAGE [victim|'all'] [min] [max] {lethal} Causes unconditional damage to the victim. Specifying "all" as victim causes damage to all characters in the room except the mobile. Min and max parameters define the minimum and maximum amounts of damage caused. By default, the damage is non-lethal, but by supplying the optional 'lethal' parameter, the damage can kill the victim. This command is silent, you must echo all messages yourself in the program. Useful for implementing special attacks for mobiles. Syntax: MOB DELAY MOB CANCEL MOB DELAY sets the time in PULSE_MOBILE after which the mobile's delay trigger is activated. If the mobile has a program defined for delay trigger, the program is executed when the timer expires. MOB CANCEL resets the delay timer. Syntax: MOB REMEMBER [victim] MOB FORGET This command enables the mobile to remember a player for future reference in a MOBprogram. The player can subsequently be referred as '$q' in programs activated by the mobile. MOB FORGET clears the target. Note that if the first time the mobile runs a program, $q is automatically set to the player who triggered the event. Most commonly this command is used in delayed programs, where the mobile has to remember the player who triggered the original event, for example to continue conversation. Syntax: MOB CALL [vnum] {victim} {target1} {target2} This command lets you call MOBprograms from within a running one, i.e. to call a MOBprogram subroutine. The first parameter is the vnum of the program to execute, the second is the victim's name (for example $n), and the third and fourth are optional object names. All other parameters except vnum can be replaced with word 'null' indicating ignored parameter. MOBprograms can be called recursively, but as a safety measure, parser allows only 5 recursions. --------------------------Regarding CPU Slowdown------------------------------- In the original MERC 2.2 MOBprogram documentation Nata'sha and Kahn wrote: "We have no real idea how slow this makes a mud. However, you will find that if you are judicious with your use of MOBprograms, you can either do little damage, or even reduce the effort on your server! This means that mobile polling (including the rand_progs) need only be checked when players are around. This reduces computation of random_stuff a little, but it is still a polling method, and subject to a basic inefficiency there. However, aside from the rand_progs, the only additional slowdowns will be when the mobile is responding to the situation, and you would get that from a special procedure as well (although MOBprograms are surely not as efficient as compiled C code)" I have used MOBprograms extensively in my own mud without adverse effects. This version of MOBprograms polls random triggers only when there are players in the area, so the load is kept to minimum. I would venture to claim that in most cases, line lag will exceed machine lag even with ample and complex use of MOBprograms. --------------------------Loading Mobiles and Objects-------------------------- No doubt you want to load objects and mobiles in your MOBprograms with "mob oload" and "mob mload". There are two problems connected to this. One is that mloaded mobiles will appear without equipment and the other is that it is difficult to keep track of the number of created mobiles and objects. If you want to mobiles to appear in your area as a result of the players' action, create a "storage room". Define resets for the mobiles as usual (equipment etc.) and place them in the storage room. When you need to use the mobiles, just "mob transfer" them to the location you want. This is better than creating mobiles on the fly, since you don't have to worry about creating too many mobiles or equipping them, area resets take care of all that. If you have a MOBprogram that creates new mobiles, you might want to make the mobiles "self-destructing". This is easiest to do with a random trigger that checks if the mobile is doing anything useful and possibly does 'mob purge $i'. Another possibility is to use a "purgemaster". Create a storage room with a single mobile. Attach a random trigger that does 'mob purge' to that mobile. Now, when you need to get rid of anything, just 'mob transfer' the mobile or item to purgemaster, and it will be destroyed sometime later. -------------------------Miscellaneous Information----------------------------- There is really no limit to the number of MOBprograms a given mobile can have. However, the length of a single command block is limited by the value of MAX_STRING_LENGTH. In my version it was around 4k, so that is probably about 100 lines. The indentation spaces shown in the example above are NOT required, but do make it easier to read (and debug). HOWEVER, all spaces and indentations are loaded into memory as a part of the program, so you're using up memory unnecessarily. Memory usage can also be reduced by using subroutines (see MOB CALL). It IS possible to accidentally make mobiles which can trigger in loops. Infinite loops have been prevented, but in case of a loop, the mobile behavior is undefined. The list of variables and triggers and if_checks will grow continuously as mud creators demand the ability to do certain things. If you have a request or if you have a new one, I don't mind hearing about them, and if you find bugs, I shall gladly attempt to squash them for you. As additions or fixes are made, the code will occasionally be redistributed. However, if you want a current version, please feel free to ask. When the code is redistributed, a file containing the change history from the original release will be provided (when possible) to allow you to patch in the changes with low grief. ----------------------------------Credits----------------------------------- The reason this code was written was to enhance the playing experience at ThePrincedom (a Merc 2.0 based world scheduled to open in October 1993) The original idea for this type of MOBprogram came from playing on: WORLDS of CARNAGE, a dikumud implemented by Robbie Roberts and Aaron Buhr. Aaron (known as Dimwit Flathead the First) was the original author from what I have been told, and I hope he will not be totally offended and angered by my coding and sharing a mimicked version with the world. This version is probably not as good as the original and I do feel remorse for publishing the idea. However, since Carnage has been down for months without a word of information regarding its return, I am glad to let one of the best features live on in future generations of MUDs. There are no objections to this code being shared, since, aside from a nuclear destruction of all the Temples of Midgaard (excepting the original one!!), bland mobiles are the greatest bane of Dikumuds today. It would be nice to get a message saying you are using the code just for our references. We shant answer questions from anyone until told where they are using the code. *grin* Since this code is not copyrighted, you of course dont have to do anything we say, but it would be nice of you to put the mobprog help screen into your database. and have mobinfo show up somewhere on a more visable help screen (possibly tagged onto the bottom of credits as a see also...) I acknowledge all the work done by the original Diku authors as well as those at Merc Industries and appreciate their willingness to share code. Also, quick thanks to Wraith for doing a little beta-installation testing. N'Atas-Ha June, 1993 natasha@gs118.sp.cs.cmu.edu In addition to this DOC file credit section, I'd like to add a thank you to Yaz, Mahatma, Zelda, and the rest of the 4th Realm crew for extensively testing MOBProgram 2.1 for me. You may see MOBPrograms in action as well as their own "flavor" of mud at marble.bu.edu 4000. Kahn Oct 28th, 1993 MERC Industries This driver was rewritten by me in summer '95. I also added room and object programs (not in ROM 2.4 version). While I acknowledge the skill and insight of the above people who conceived the original MOBprogram idea, they should not be held responsible in any way for this release. I can't promise I will be able to support this code in the future, use at your own risk. However, if you're using this code, and/or have bug reports or improvements, I'd be glad to hear from you. The revised MOBprograms can be seen in action at Imperium Gothique, mud.pitek.fi 4000. This code may be freely used and distributed, but some favorable publicity (such as having my name appended to your in-game credits) would encourage me to develop this software. Newt@Imperium Gothique May 1995-Jan 1996 mn54196@uta.fi (am I lazy or what?) ===================CUT HERE FOR QUICK REFERENCE SHEET======================== MOBprogram quick reference to triggers/variables/ifchecks/mobcommands ----------------------------------------------------------------------------- Area file format ----------------------------------------------------------------------------- #MOBILES M {trigger} {program vnum} {argument}~ #MOBPROGS #{program vnum} {program code}~ ----------------------------------------------------------------------------- trigger argument and what must happen to activate trigger ----------------------------------------------------------------------------- act STRING to match from act() to mobile speech STRING to match in dialogue (say, tell) to mobile rand PERCENT chance to check whenever a PC is in the mobiles zone bribe INTEGER miminum amount of silver coins given to mobile give OBJECT NAME, OBJECT VNUM or ALL to match when obj given to mobile greet PERCENT chance to check if visible char enters mobile's room grall PERCENT chance to check when any char enters mobile's room entry PERCENT chance to check when mobile moves to a new room exit EXIT NUMBER a visible char tries to exit mobile's room exall EXIT NUMBER any char tries to exit mobile's room kill PERCENT chance to check when the mobile begins fighting fight PERCENT chance to check at fight_pulse if mobile is fighting hpcnt PERCENT lower than mobile's hit/max_hit if mobile is fighting death PERCENT chance to check after mobile has been slain surr PERCENT chance to activate when a char surrenders to mobile ---------------------------------------------------------------------------- variable mobile actor victim random target object 2nd_object ----------------------------------------------------------------------------- name $i $n $t $r $q $o $p shrt_desc/title $I $N $T $R $Q $O $P he/she/it $j $e $E $J $X -- -- him/her/it $l $m $M $L $Y -- -- his/hers/its $k $s $S $K $Z -- -- a/an -- -- -- -- -- -- -- ---------------------------------------------------------------------------- ifcheck argument(s) meaning ----------------------------------------------------------------------------- rand num Is random percentage less than or equal to num mobhere vnum Is a NPC with this vnum in the room mobhere name Is a NPC with this name in the room objhere vnum Is an object with this vnum in the room objhere name Is an object with this name in the room mobexists name Does NPC 'name' exist somewhere in the world objexists name Does object 'name' exist somewhere in the world - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - people == integer Is the number of people in the room equal to integer players == integer Is the number of PCs in the room equal to integer mobs == integer Is the number of NPCs in the room equal to integer clones == integer Is the number of NPCs in the room with the same - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - isnpc $* Is $* an NPC ispc $* Is $* a PC isgood $* Does $* have a good alignment isneutral $* Does $* have a neutral alignment isevil $* Does $* have an evil alignment isimmort $* Is $* an immortal (level of $* > LEVEL_HERO) ischarm $* Is $* affected by charm isfollow $* Is $* a follower with their master in the room isactive $* Is $*'s position > POS_SLEEPING isdelay $* Does $* have a delayed MOBprogram pending isvisible $* Is $* visible to NPC who activated the program hastarget $* Does $* have a MOBprogram target in the room istarget $* Is $* the target of NPC who activated the program - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - affected $* 'affect' Is $* affected by 'affect' act $* 'act' Is $*'s ACT bit 'act' set off $* 'off' Is $*'s OFF bit 'off' set imm $* 'imm' Is $*'s IMM bit 'imm' set carries $* 'name' Is $* carrying object 'name' wears $* 'name' Is $* wearing object 'name' has $* 'type' Does $* have object of item_type 'type' uses $* 'type' Is $* wearing object of item_type 'type' name $* 'name' Is $*'s name 'name' pos $* 'position' Is $*'s position 'position' (sleeping etc.) clan $* 'name' Does $* belong to clan 'name' race $* 'name' Is $* of race 'name' class $* 'name' Is $*'s class 'name' objtype $* 'type' Is $*'s item_type 'type' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vnum $* == integer Is $*'s virtual number equal to integer hpcnt $* == integer Is $*'s hitpoint percentage equal to integer room $* == integer Is vnum of the room $* is in equal to integer sex $* == integer Is $*'s sex equal to integer level $* == integer Is $*'s level equal to integer align $* == integer Is $*'s alignment equal to integer money $* == integer Does $* have money (in silver) equal to integer objval# $* == integer Is $*->value[#] equal to integer (# from 0-4) ----------------------------------------------------------------------------- MOBcommand argument_list MOBcommand argument_list ----------------------------------------------------------------------------- ASOUND [text_string] ECHO [text_string] GECHO [text_string] ZECHO [text_string] ECHOAT [victim] [text_string] ECHOAROUND [victim] [text_string] MLOAD [vnum] OLOAD [vnum] [level] {wear|room} KILL [victim] FLEE REMOVE [victim] [vnum] MOB JUNK [object] PURGE [argument] AT [dest] [command] GOTO [dest] TRANSFER [victim] [dest] GTRANSFER [victim] [dest] OTRANSFER [object] [dest] FORCE [victim] [command] GFORCE [victim] [command] VFORCE [vnum] [command] CAST [spell] [victim] DAMAGE [victim] [min] [max] {lethal} DELAY CANCEL REMEMBER [victim] FORGET CALL [vnum] [victim] [target1] [target2] ======================END OF QUICK REFERENCE SHEET=========================== +++++++++++++++++++++++++++++++ EXAMPLES ++++++++++++++++++++++++++++++++++++ In #MOBILES: M act 1000 pokes you in the ribs.~ In #MOBPROGS: #1000 if isnpc $n chuckle poke $n break else if level $n <= 5 or isgood $n tell $n I would rather you didnt poke me. else if level $n > 15 scream say Ya know $n. I hate being poked!!! if mobhere guard mob force guard kill $n endif kill $n break endif slap $n shout MOMMY!!! $N is poking me. endif endif ~ Ok.. time to translate.. the trigger will only happen when the mobile gets the message "... pokes you in the ..." If the offender (recall the $n and $N refer to the char who did the poking...) is an NPC, then the mobile merely chuckles and pokes back. If the offender was a PC then good and low level characters get a warning, high level chars get attacked, and midlevel chars get slapped and whined at. Also, when attacking, the mobile will check if there are guards in the room (if mobhere guard) and if one is found, it will be forced to attack the player, too (mob force guard mob kill $n). Notice the use of a MOBcommand "mob force". Note that two of these mobiles could easily get into an infinite poke war which slows down (or frequently crashes) the mud just a bit :( Be very careful about things like that if you can. (i.e dont respond to a poke with a poke, and try not to let heavily programmed robot mobiles wander around together. More on that is given above.) Also, it is clear that the 'order' command could get confused with the 'or' control flow. However, this is only the case when 'order' is abbreviated to its two letter form, and placed immediately following an 'if' line. Thus, if you want to be that malicious in trying to break the MOBprogram code, noone is going to stand in your way (However, the result of this would be a bug message and a bail out from the ifcheck so things dont really break) Another example: This program could be used on a temple guardian mobile, whose job is to prevent evil characters from entering the sanctuary. Let's assume the exit to the temple is north (exit 0) and the temple antechamber is room 2301 In #MOBILES M exit 1001 0 In #MOBPROGS #1001 if isgood $n say Hail! emote salutes $n. if carries $n holy mob transfer $n 2301 else say If you wish to enter the temple, get a holy symbol. endif else curse $n say Get lost, you scum! endif ~ How this works: The trigger is activated when the player tries to exit north from the room. If the player is of good alignment, the guard will greet the player. However, the guard will not let the player to the temple unless he or she carries a holy symbol. If the player is neutral or evil, the guard will curse and block the way. Example of using DELAY and REMEMBER: In #MOBILES M greet 1002 100 M delay 1003 100 In #MOBPROGS #1002 if isevil $n say You infidel! Go away or face the wrath of mighty Mota! mob remember $n mob delay 10 break endif ~ #1003 if hastarget $i growl mob echo $I screams and attacks $Q. mob kill $q else mob forget endif ~ How this works: When the player enters a room, the mobile checks if the player is evil. If this is the case, the mobile makes the player the target (mob remember) and sets up a delay of 10 * PULSE_MOBILE. When the delay expires, program #1003 is activated. The mobile checks if the target is still in the room (hastarget), and if the player hasn't left, the mobile attacks ($q and $Q refer to the target). If the player has left, the mobile will forget the player (mob forget). Example of MOB CALL: In #MOBILES: M greet 1004 100 In #MOBPROGS: #1004 if isgood $n mob call 1005 $n null null else mob call 1006 $n null null endif ~ #1005 mob echo Suddenly, a bright aura surrounds $I! mob cast 'heal' $n ~ #1006 mob echoat $n $I points $l finger at you in fury! mob echoaround $I points $l finger at $N in fury! mob cast 'curse' $n ~ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ MORE EXAMPLES ------------- Here are some MOBprograms I have been using to test this release. The mobiles are from midgaard.are in the stock ROM 2.4b2. --------------------------------------------------------------------------- #MOBILES --------------------------------------------------------------------------- 1. The baker has two triggers, the other is to greet all characters who enter the shop and the other to react to phrase "fine day" when spoken aloud in the shop. See programs #3001 and #3002 in the #MOBPROGS section. --------------------------------------------------------------------------- #3001 baker~ the baker~ The baker looks at you calmly, wiping flour from his face with one hand. ~ A fat, nice looking baker. But you can see that he has many scars on his body. ~ human~ ABV 0 900 0 23 0 1d1+999 1d1+99 1d8+20 beating -15 -15 -15 -15 CDF ABCD 0 0 stand stand male 500 0 0 medium 0 M grall 3001 100~ M speech 3002 fine day~ --------------------------------------------------------------------------- 2. The fido has several triggers related to fighting. When attacked, the fido will activate program #3062. Every combat round there's a 75% chance that the fido will call program #3063. The fido is cowardly, so when its hit point percentage falls below 70% it will try to surrender to the attacker. When the fido dies, it will call program #3064. However, if the attacker surrenders to the fido, the beast will call program #3071 --------------------------------------------------------------------------- #3062 fido dog~ the beastly fido~ A beastly fido is here. ~ Fido is a small dog that has a foul smell and pieces of rotted meat hanging around its teeth. ~ fido~ AFGHU 0 -200 0 0 0 1d6+4 1d1+99 1d4+0 bite 10 10 10 10 0 0 0 0 stand stand either 0 0 0 small 0 M kill 3062 100~ M fight 3063 75~ M hpcnt 3072 70~ M death 3064 100~ M surr 3071 100~ --------------------------------------------------------------------------- 3. This vagabond reacts to being given a "ring" (for no particular reason) and to receiving some money (more than 10 silver). Keyword "ring" could be replaced with an object vnum. --------------------------------------------------------------------------- #3063 vagabond~ the vagabond~ A vagabond is here, looking for victims. ~ He looks pretty mean. ~ human~ ACS 0 -200 0 5 1 2d6+60 1d1+99 1d6+1 punch 7 5 5 10 BJNQ 0 0 C stand stand male 18 0 0 medium 0 M give 3003 ring~ M bribe 3004 10~ --------------------------------------------------------------------------- 4. This drunk demonstrates REMEMBER and DELAY actions. When someone enters the bar, the drunk will activate program #3066. When the delay timer of the drunk expires, it will execute program #3067. --------------------------------------------------------------------------- #3064 drunk~ the drunk~ A singing, happy drunk wanders around, singing about Moria. ~ A drunk who seems to be too happy, and to carry too much money. ~ human~ AG 0 400 0 2 -1 2d6+22 1d1+99 1d6+0 beating 8 8 8 10 U 0 0 C stand stand male 65 0 0 medium 0 M greet 3067 100~ M delay 3068 100~ --------------------------------------------------------------------------- 5. The shopkeeper is greets customers as they leave his shop (south, exit number 2). --------------------------------------------------------------------------- #3070 shopkeeper old man~ the ancient potion-brewer~ An old man eyes you greedily. The old man says, 'Would you like to buy a nice love potion?' ~ He looks very dangerous. I wouldn't try to rob him. ~ human~ ABQRV DEF 1000 0 32 0 1d1+999 1d1+999 10d10+10 magic -15 -15 -15 -15 FGH ABCD 0 0 stand stand male 5000 0 0 medium 0 M exit 3070 2~ --------------------------------------------------------------------------- #MOBPROGS --------------------------------------------------------------------------- 1. The baker will greet people arriving to his shop. This particular baker is a real casanova and will pay special attention to ladies. --------------------------------------------------------------------------- #3001 if isimmort $n say Greetings, master $N! bow else if sex $n < 2 say Hello! How may I serve you? chuckle else say Good day, milady! How may I be of help today? wink endif endif ~ --------------------------------------------------------------------------- 1. This program demonstrates 'affected' if_check. --------------------------------------------------------------------------- #3002 if affected $n flying or affected $n haste say My, aren't you in a hurry! endif say Yes, it's a splendid day, isn't it? smile ~ --------------------------------------------------------------------------- 2. When given a ring, the vagabond will return it to the giver. --------------------------------------------------------------------------- #3003 say What do you want me to do with this? give $o $n ~ --------------------------------------------------------------------------- 2. When the vagabond is given more than 10 silver, it checks if the giver is below lvl 5. If so, the vagabond will try to rob the kind soul! --------------------------------------------------------------------------- #3004 if sex $n < 2 say Thank ye, kind sir! else say Thank ye, milady! endif if level $n < 5 say Since you have money in abundance, let me share your wealth! mob kill $n endif ~ --------------------------------------------------------------------------- 3. When the fido is attacked, it will simply emote something: --------------------------------------------------------------------------- #3062 emote yelps in anger! ~ --------------------------------------------------------------------------- 3. Every round of combat the fido will make noise. Note the separate commands for echoing to the opponent and to the room. --------------------------------------------------------------------------- #3063 mob echoat $n $I barks and snarls at you! mob echoaround $n $I barks and snarls at $n! ~ --------------------------------------------------------------------------- 3. A nasty surprise! When the fido is killed, it will explode, causing minor and non-lethal damage to everyone in the room. The emote is necessary since mob damage will not echo anything. --------------------------------------------------------------------------- #3064 emote explodes! mob damage all 5 10 nokill ~ --------------------------------------------------------------------------- 3. When someone surrenders to the fido, it is amused: --------------------------------------------------------------------------- #3065 laugh growl ~ --------------------------------------------------------------------------- 3. This is what happens when the fido's hit points fall below 75% of the maximum: --------------------------------------------------------------------------- #3066 whimper surrender ~ --------------------------------------------------------------------------- 4. Ok, this is the most complex of all the examples here. When the drunk sees someone enter, it will check if it already has a target (someone else has activated the delay timer). If it doesn't have a target, it will choose the person who activated the trigger (mob remember) and set the delay (mob delay 5). --------------------------------------------------------------------------- #3067 if isdelay $i break else mob echoat $n $I rises and begins to wobble towards you... mob echoaround$n $I rises and begins to wobble towards $N... mob remember $n mob delay 5 endif ~ --------------------------------------------------------------------------- 4. This program activates 5*PULSE_MOBILE after the previous program. The drunk will check if the target is still present (hastarget). If the target ($q) is in the room, the drunk will be sick all over the poor sod. Finally, the drunk will forget the target and begin to wait for another victim. --------------------------------------------------------------------------- #3068 if hastarget $i puke $q say S-sorry, matey... hiccup else mob forget endif ~ --------------------------------------------------------------------------- 5. This demonstrates exit trigger. As exit trigger blocks the exit, the mobile has to transfer the character outside the shop (location 3046). --------------------------------------------------------------------------- #3070 if money $n > 10000 say Do come again anytime, $N! else say Come back when you've got more money! endif mob transfer $n 3046 ~ --------------------------------------------------------------------------- MOBROGS section is terminated with: --------------------------------------------------------------------------- #0 --------------------------------------------------------------------------- MOBprograms for ROM 2.4b2 HACKER'S GUIDE Newt@Imperium Gothique (mn54196@uta.fi) Jan-Feb 1996 TABLE OF CONTENTS How MOBprograms Are Implemented Adding New MOBcommands Adding New Trigger Events Adding New If_checks About OLC and MOBprograms ---------------------- How MOBprograms Are Implemented -------------------- As explained in MOBPROG.DOC, the each MOBprogram is a string, lines are separated with CR/LFs. The strings are stored independently, a global linked list of type MPROG_CODE contains pointers to all existing MOBprograms. This allows all mobiles in game to share MOBprograms, and MOBprograms can be used as subroutines. A MOBprogram is identified by a unique virtual number. MPROG_CODE contains fields: sh_int vnum; /* The unique virtual number */ char * code; /* A pointer to MOBprogram commands */ Each mobile prototype (MOB_INDEX_DATA) has a pointer to a linked list of type MPROG_LIST: int trig_type; /* The trigger type (a bitvector) */ char * trig_phrase; /* The trigger phrase */ char * code; /* A pointer to MOBprogram commands */ During MUD bootup, the 'code' pointer in each mprog_list node is linked to MOBprogram commands through a vnum lookup to the global list. MOBprograms are designed to be permanently allocated, so the address of the actual code is copied both to the global list and to the mobile prototype's mprog_list (see "About OLC and MOBprograms"). When a trigger event occurs, the mobile is checked for the event trigger. If a trigger is found, the trigger phrase (converted to a number if necessary) is checked. If the check succeeds, a pointer to the MOBprogram code is passed to program_flow() for execution. Here's a simple diagram: GLOBAL MPROG_LIST--->MPROG_CODE-->MPROG_CODE-->MPROG_CODE-->... -->NULL code MOBILE--+ | | | MOB PROTOTYPE-->MPROG_LIST-->... -->NULL | +------>trigger type TRIG_SPEECH | | +--->trigger phrase 'hello' V | | code ------------------------->say Greetings $n | +---------+ | | | V TRIGGER EVENT-->TRIGGER CHECK----------------->EXECUTION ------>OUTPUT do_say() mp_act_trigger() program_flow() expand_arg() | | interpret() interpret() | | say 'hello' The mobile says 'Greetings, Player!' | | PLAYER--+ <---------------------------------------------------------+ ------------------------- Adding New MOBcommands ------------------------- Adding new MOBcommands is fairly simple: - Write the command function. It should be of type DO_FUN (see merc.h). Note that 'ch' parameter means the mobile, not the character who triggered the event! Add the function to file mob_prog.c - Add the function prototype to mob_prog.h (DECLARE_DO_FUN). - Add a line defining the command keyword to mob_cmd_table[] in mob_prog.c Note that even though mobiles can perform immortal-like actions via MOBcommands, their character level is NOT modified; i.e. mobiles are not immortals by default! ----------------------- Adding New Trigger Events ------------------------ By trigger events is meant player actions that cause the existence of a trigger on a given mobile to be checked. For example, giving money to a mobile is a trigger event, since it causes a trigger function to be called (see act_obj.c). Here are is the procedure for adding new trigger events: - Define the trigger flag. Add a #define TRIG_nnnn line to merc.h and the corresponding line to mprog_flags[] table in tables.c. The flag is a bit vector, so you may have up to 31 different trigger events defined (assuming a signed int is 32 bits). - Add a trigger check to the function of your choice. A trigger check typically checks if the mobile has the trigger flag set (macro HAS_TRIGGER) and calls a trigger function. There are two general purpose trigger functions in mob_prog.c: mp_act_trigger() for string trigger phrases and mp_percent_trigger() for numeric ones. - If you write your own trigger function, it should call program_flow() if the check is successful. Make sure that parameters are passed in correct order to program_flow()! ------------------------- Adding New If_checks --------------------------- Adding new if_checks is not difficult, but you'll have to be careful. You should familiarize yourself with the source code in mob_prog.c before trying to add new if_checks. This is how you do it: - Add a #define CHK_nnnn line to mob_prog.c, and a corresponding keyword to the fn_keywords[] table. It is important that the value of the #define corresponds to the order of the keyword in the keyword table! - Determine the if_check type (there are five different types of if_check, see MOBPROG.DOC). Add a line to the appropriate place in function cmd_eval(). ----------------------- About OLC and MOBprograms ------------------------ Bear in mind that the addresses of MOBprogram code are copied both in the MOBprogram definitions of mobile prototypes AND in the global list. If you change the code via free_string() and str_dup(), you must update both the pointer in each mobile prototype and in the global list. --------------------------------------------------------------------------