/***************************************************************************
* Original Diku Mud copyright (C) 1990, 1991 by Sebastian Hammer, *
* Michael Seifert, Hans Henrik St{rfeldt, Tom Madsen, and Katja Nyboe. *
* *
* Merc Diku Mud improvments copyright (C) 1992, 1993 by Michael *
* Chastain, Michael Quan, and Mitchell Tse. *
* *
* In order to use any part of this Merc Diku Mud, you must comply with *
* both the original Diku license in 'license.doc' as well the Merc *
* license in 'license.txt'. In particular, you may not remove either of *
* these copyright notices. *
* *
* Much time and thought has gone into this software and you are *
* benefitting. We hope that you share your changes too. What goes *
* around, comes around. *
***************************************************************************/
/***************************************************************************
* The MOBprograms have been contributed by N'Atas-ha. Any support for *
* these routines should not be expected from Merc Industries. However, *
* under no circumstances should the blame for bugs, etc be placed on *
* Merc Industries. They are not guaranteed to work on all systems due *
* to their frequent use of strxxx functions. They are also not the most *
* efficient way to perform their tasks, but hopefully should be in the *
* easiest possible way to install and begin using. Documentation for *
* such installation can be found in INSTALL. Enjoy... N'Atas-Ha *
***************************************************************************/
#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "merc.h"
/*
* Local function prototypes
*/
char *mprog_next_command args( ( char *clist ) );
bool mprog_seval args( ( char *lhs, char *opr, char *rhs ) );
bool mprog_veval args( ( int lhs, char *opr, int rhs ) );
bool mprog_do_ifchck args( ( char *ifchck, CHAR_DATA * mob,
CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm ) );
char *mprog_process_if args( ( char *ifchck, char *com_list,
CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm ) );
void mprog_translate args( ( char ch, char *t, CHAR_DATA * mob,
CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm ) );
void mprog_process_cmnd args( ( char *cmnd, CHAR_DATA * mob,
CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm ) );
void mprog_driver args( ( char *com_list, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo ) );
/***************************************************************************
* Local function code and brief comments.
*/
/* if you dont have these functions, you damn well should... */
#ifdef DUNNO_STRSTR
char *strstr( s1, s2 )
const char *s1;
const char *s2;
{
char *cp;
int i, j = strlen( s1 ) - strlen( s2 ), k = strlen( s2 );
if( j < 0 )
return NULL;
for( i = 0; i <= j && strncmp( s1++, s2, k ) != 0; i++ );
return ( i > j ) ? NULL : ( s1 - 1 );
}
#endif
/* Used to get sequential lines of a multi line string (separated by "\r\n")
* Thus its like one_argument(), but a trifle different. It is destructive
* to the multi line string argument, and thus clist must not be shared.
*/
char *mprog_next_command( char *clist )
{
char *pointer = clist;
while( *pointer != '\n' && *pointer != '\0' )
pointer++;
if( *pointer == '\n' )
*pointer++ = '\0';
if( *pointer == '\r' )
*pointer++ = '\0';
return ( pointer );
}
/* These two functions do the basic evaluation of ifcheck operators.
* It is important to note that the string operations are not what
* you probably expect. Equality is exact and division is substring.
* remember that lhs has been stripped of leading space, but can
* still have trailing spaces so be careful when editing since:
* "guard" and "guard " are not equal.
*/
bool mprog_seval( char *lhs, char *opr, char *rhs )
{
if( !str_cmp( opr, "==" ) )
return ( bool ) ( !str_cmp( lhs, rhs ) );
if( !str_cmp( opr, "!=" ) )
return ( bool ) ( str_cmp( lhs, rhs ) );
if( !str_cmp( opr, "/" ) )
return ( bool ) ( !str_infix( rhs, lhs ) );
if( !str_cmp( opr, "!/" ) )
return ( bool ) ( str_infix( rhs, lhs ) );
bug( "Improper MOBprog operator\r\n", 0 );
return 0;
}
bool mprog_veval( int lhs, char *opr, int rhs )
{
if( !str_cmp( opr, "==" ) )
return ( lhs == rhs );
if( !str_cmp( opr, "!=" ) )
return ( lhs != rhs );
if( !str_cmp( opr, ">" ) )
return ( lhs > rhs );
if( !str_cmp( opr, "<" ) )
return ( lhs < rhs );
if( !str_cmp( opr, ">=" ) )
return ( lhs <= rhs );
if( !str_cmp( opr, ">=" ) )
return ( lhs >= rhs );
if( !str_cmp( opr, "&" ) )
return ( lhs & rhs );
if( !str_cmp( opr, "|" ) )
return ( lhs | rhs );
bug( "Improper MOBprog operator\r\n", 0 );
return 0;
}
/* This function performs the evaluation of the if checks. It is
* here that you can add any ifchecks which you so desire. Hopefully
* it is clear from what follows how one would go about adding your
* own. The syntax for an if check is: ifchck ( arg ) [opr val]
* where the parenthesis are required and the opr and val fields are
* optional but if one is there then both must be. The spaces are all
* optional. The evaluation of the opr expressions is farmed out
* to reduce the redundancy of the mammoth if statement list.
* If there are errors, then return -1 otherwise return boolean 1,0
*/
bool mprog_do_ifchck( char *ifchck, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm )
{
char buf[MAX_INPUT_LENGTH];
char arg[MAX_INPUT_LENGTH];
char opr[MAX_INPUT_LENGTH];
char val[MAX_INPUT_LENGTH];
CHAR_DATA *vict = ( CHAR_DATA * ) vo;
OBJ_DATA *v_obj = ( OBJ_DATA * ) vo;
char *bufpt = buf;
char *argpt = arg;
char *oprpt = opr;
char *valpt = val;
char *point = ifchck;
int lhsvl;
int rhsvl;
if( *point == '\0' )
{
bug( "Mob: %d null ifchck", mob->pIndexData->vnum );
return -1;
}
/*
* skip leading spaces
*/
while( *point == ' ' )
point++;
/*
* get whatever comes before the left paren.. ignore spaces
*/
while( *point != '(' )
if( *point == '\0' )
{
bug( "Mob: %d ifchck syntax error", mob->pIndexData->vnum );
return -1;
}
else if( *point == ' ' )
point++;
else
*bufpt++ = *point++;
*bufpt = '\0';
point++;
/*
* get whatever is in between the parens.. ignore spaces
*/
while( *point != ')' )
if( *point == '\0' )
{
bug( "Mob: %d ifchck syntax error", mob->pIndexData->vnum );
return -1;
}
else if( *point == ' ' )
point++;
else
*argpt++ = *point++;
*argpt = '\0';
point++;
/*
* check to see if there is an operator
*/
while( *point == ' ' )
point++;
if( *point == '\0' )
{
*opr = '\0';
*val = '\0';
}
else /* there should be an operator and value, so get them */
{
while( ( *point != ' ' ) && ( !isalnum( *point ) ) )
if( *point == '\0' )
{
bug( "Mob: %d ifchck operator without value", mob->pIndexData->vnum );
return -1;
}
else
*oprpt++ = *point++;
*oprpt = '\0';
/*
* finished with operator, skip spaces and then get the value
*/
while( *point == ' ' )
point++;
for( ;; )
{
if( ( *point != ' ' ) && ( *point == '\0' ) )
break;
else
*valpt++ = *point++;
}
*valpt = '\0';
}
bufpt = buf;
argpt = arg;
oprpt = opr;
valpt = val;
/*
* Ok... now buf contains the ifchck, arg contains the inside of the
* * parentheses, opr contains an operator if one is present, and val
* * has the value if an operator was present.
* * So.. basically use if statements and run over all known ifchecks
* * Once inside, use the argument and expand the lhs. Then if need be
* * send the lhs,opr,rhs off to be evaluated.
*/
if( !str_cmp( buf, "rand" ) )
{
return ( number_percent( ) <= atoi( arg ) );
}
if( !str_cmp( buf, "ispc" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return 0;
case 'n':
if( actor )
return ( !IS_NPC( actor ) );
else
return -1;
case 't':
if( vict )
return ( !IS_NPC( vict ) );
else
return -1;
case 'r':
if( rndm )
return ( !IS_NPC( rndm ) );
else
return -1;
default:
bug( "Mob: %d bad argument to 'ispc'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isnpc" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return 1;
case 'n':
if( actor )
return IS_NPC( actor );
else
return -1;
case 't':
if( vict )
return IS_NPC( vict );
else
return -1;
case 'r':
if( rndm )
return IS_NPC( rndm );
else
return -1;
default:
bug( "Mob: %d bad argument to 'isnpc'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isgood" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return IS_GOOD( mob );
case 'n':
if( actor )
return IS_GOOD( actor );
else
return -1;
case 't':
if( vict )
return IS_GOOD( vict );
else
return -1;
case 'r':
if( rndm )
return IS_GOOD( rndm );
else
return -1;
default:
bug( "Mob: %d bad argument to 'isgood'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isfight" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return ( mob->fighting ) ? 1 : 0;
case 'n':
if( actor )
return ( actor->fighting ) ? 1 : 0;
else
return -1;
case 't':
if( vict )
return ( vict->fighting ) ? 1 : 0;
else
return -1;
case 'r':
if( rndm )
return ( rndm->fighting ) ? 1 : 0;
else
return -1;
default:
bug( "Mob: %d bad argument to 'isfight'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isimmort" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return ( get_trust( mob ) > LEVEL_IMMORTAL );
case 'n':
if( actor )
return ( get_trust( actor ) > LEVEL_IMMORTAL );
else
return -1;
case 't':
if( vict )
return ( get_trust( vict ) > LEVEL_IMMORTAL );
else
return -1;
case 'r':
if( rndm )
return ( get_trust( rndm ) > LEVEL_IMMORTAL );
else
return -1;
default:
bug( "Mob: %d bad argument to 'isimmort'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "ischarmed" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return IS_AFFECTED( mob, AFF_CHARM );
case 'n':
if( actor )
return IS_AFFECTED( actor, AFF_CHARM );
else
return -1;
case 't':
if( vict )
return IS_AFFECTED( vict, AFF_CHARM );
else
return -1;
case 'r':
if( rndm )
return IS_AFFECTED( rndm, AFF_CHARM );
else
return -1;
default:
bug( "Mob: %d bad argument to 'ischarmed'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isfollow" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return ( mob->master != NULL && mob->master->in_room == mob->in_room );
case 'n':
if( actor )
return ( actor->master != NULL && actor->master->in_room == actor->in_room );
else
return -1;
case 't':
if( vict )
return ( vict->master != NULL && vict->master->in_room == vict->in_room );
else
return -1;
case 'r':
if( rndm )
return ( rndm->master != NULL && rndm->master->in_room == rndm->in_room );
else
return -1;
default:
bug( "Mob: %d bad argument to 'isfollow'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "isaffected" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return ( mob->affected_by & atoi( arg ) );
case 'n':
if( actor )
return ( actor->affected_by & atoi( arg ) );
else
return -1;
case 't':
if( vict )
return ( vict->affected_by & atoi( arg ) );
else
return -1;
case 'r':
if( rndm )
return ( rndm->affected_by & atoi( arg ) );
else
return -1;
default:
bug( "Mob: %d bad argument to 'isaffected'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "hitprcnt" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->hit / mob->max_hit;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->hit / actor->max_hit;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->hit / vict->max_hit;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->hit / rndm->max_hit;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'hitprcnt'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "inroom" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->in_room->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->in_room->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->in_room->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->in_room->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'inroom'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "sex" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->sex;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->sex;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->sex;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->sex;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'sex'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "position" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->position;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->position;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->position;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->position;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'position'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "level" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = get_trust( mob );
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = get_trust( actor );
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = get_trust( vict );
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = get_trust( rndm );
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'level'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "class" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->class;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->class;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->class;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->class;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'class'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "goldamt" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->gold;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
lhsvl = actor->gold;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 't':
if( vict )
{
lhsvl = vict->gold;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'r':
if( rndm )
{
lhsvl = rndm->gold;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'goldamt'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "objtype" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'o':
if( obj )
{
lhsvl = obj->item_type;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->item_type;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'objtype'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "objval0" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'o':
if( obj )
{
lhsvl = obj->value[0];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->value[0];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'objval0'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "objval1" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'o':
if( obj )
{
lhsvl = obj->value[1];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->value[1];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'objval1'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "objval2" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'o':
if( obj )
{
lhsvl = obj->value[2];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->value[2];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'objval2'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "objval3" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'o':
if( obj )
{
lhsvl = obj->value[3];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->value[3];
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'objval3'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "number" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
lhsvl = mob->gold;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
case 'n':
if( actor )
{
if( IS_NPC( actor ) )
{
lhsvl = actor->pIndexData->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
}
else
return -1;
case 't':
if( vict )
{
if( IS_NPC( actor ) )
{
lhsvl = vict->pIndexData->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
}
else
return -1;
case 'r':
if( rndm )
{
if( IS_NPC( actor ) )
{
lhsvl = rndm->pIndexData->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
}
else
return -1;
case 'o':
if( obj )
{
lhsvl = obj->pIndexData->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
case 'p':
if( v_obj )
{
lhsvl = v_obj->pIndexData->vnum;
rhsvl = atoi( val );
return mprog_veval( lhsvl, opr, rhsvl );
}
else
return -1;
default:
bug( "Mob: %d bad argument to 'number'", mob->pIndexData->vnum );
return -1;
}
}
if( !str_cmp( buf, "name" ) )
{
switch ( arg[1] ) /* arg should be "$*" so just get the letter */
{
case 'i':
return mprog_seval( mob->name, opr, val );
case 'n':
if( actor )
return mprog_seval( actor->name, opr, val );
else
return -1;
case 't':
if( vict )
return mprog_seval( vict->name, opr, val );
else
return -1;
case 'r':
if( rndm )
return mprog_seval( rndm->name, opr, val );
else
return -1;
case 'o':
if( obj )
return mprog_seval( obj->name, opr, val );
else
return -1;
case 'p':
if( v_obj )
return mprog_seval( v_obj->name, opr, val );
else
return -1;
default:
bug( "Mob: %d bad argument to 'name'", mob->pIndexData->vnum );
return -1;
}
}
/*
* Ok... all the ifchcks are done, so if we didnt find ours then something
* * odd happened. So report the bug and abort the MOBprogram (return error)
*/
bug( "Mob: %d unknown ifchck", mob->pIndexData->vnum );
return -1;
}
/* Quite a long and arduous function, this guy handles the control
* flow part of MOBprograms. Basicially once the driver sees an
* 'if' attention shifts to here. While many syntax errors are
* caught, some will still get through due to the handling of break
* and errors in the same fashion. The desire to break out of the
* recursion without catastrophe in the event of a mis-parse was
* believed to be high. Thus, if an error is found, it is bugged and
* the parser acts as though a break were issued and just bails out
* at that point. I havent tested all the possibilites, so I'm speaking
* in theory, but it is 'guaranteed' to work on syntactically correct
* MOBprograms, so if the mud crashes here, check the mob carefully!
*/
char *mprog_process_if( char *ifchck, char *com_list, CHAR_DATA * mob,
CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm )
{
char buf[MAX_INPUT_LENGTH];
char *morebuf = '\0';
char *cmnd = '\0';
bool loopdone = FALSE;
bool flag = FALSE;
int legal;
/*
* check for trueness of the ifcheck
*/
if( ( legal = mprog_do_ifchck( ifchck, mob, actor, obj, vo, rndm ) ) )
{
if( legal == 1 )
flag = TRUE;
else
return NULL;
}
while( loopdone == FALSE ) /*scan over any existing or statements */
{
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob: %d no commands after IF/OR", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
if( !str_cmp( buf, "or" ) )
{
if( ( legal = mprog_do_ifchck( morebuf, mob, actor, obj, vo, rndm ) ) )
{
if( legal == 1 )
flag = TRUE;
else
return NULL;
}
}
else
loopdone = TRUE;
}
if( flag )
for( ;; ) /*ifcheck was true, do commands but ignore else to endif */
{
if( !str_cmp( buf, "if" ) )
{
com_list = mprog_process_if( morebuf, com_list, mob, actor, obj, vo, rndm );
while( *cmnd == ' ' )
cmnd++;
if( *com_list == '\0' )
return NULL;
cmnd = com_list;
com_list = mprog_next_command( com_list );
morebuf = one_argument( cmnd, buf );
continue;
}
if( !str_cmp( buf, "break" ) )
return NULL;
if( !str_cmp( buf, "endif" ) )
return com_list;
if( !str_cmp( buf, "else" ) )
{
while( str_cmp( buf, "endif" ) )
{
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob: %d missing endif after else", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
}
return com_list;
}
mprog_process_cmnd( cmnd, mob, actor, obj, vo, rndm );
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob: %d missing else or endif", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
}
else /*false ifcheck, find else and do existing commands or quit at endif */
{
while( ( str_cmp( buf, "else" ) ) && ( str_cmp( buf, "endif" ) ) )
{
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob: %d missing an else or endif", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
}
/*
* found either an else or an endif.. act accordingly
*/
if( !str_cmp( buf, "endif" ) )
return com_list;
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob: %d missing endif", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
for( ;; ) /*process the post-else commands until an endif is found. */
{
if( !str_cmp( buf, "if" ) )
{
com_list = mprog_process_if( morebuf, com_list, mob, actor, obj, vo, rndm );
while( *cmnd == ' ' )
cmnd++;
if( *com_list == '\0' )
return NULL;
cmnd = com_list;
com_list = mprog_next_command( com_list );
morebuf = one_argument( cmnd, buf );
continue;
}
if( !str_cmp( buf, "else" ) )
{
bug( "Mob: %d found else in an else section", mob->pIndexData->vnum );
return NULL;
}
if( !str_cmp( buf, "break" ) )
return NULL;
if( !str_cmp( buf, "endif" ) )
return com_list;
mprog_process_cmnd( cmnd, mob, actor, obj, vo, rndm );
cmnd = com_list;
com_list = mprog_next_command( com_list );
while( *cmnd == ' ' )
cmnd++;
if( *cmnd == '\0' )
{
bug( "Mob:%d missing endif in else section", mob->pIndexData->vnum );
return NULL;
}
morebuf = one_argument( cmnd, buf );
}
}
}
/* This routine handles the variables for command expansion.
* If you want to add any go right ahead, it should be fairly
* clear how it is done and they are quite easy to do, so you
* can be as creative as you want. The only catch is to check
* that your variables exist before you use them. At the moment,
* using $t when the secondary target refers to an object
* i.e. >prog_act drops~<nl>if ispc($t)<nl>sigh<nl>endif<nl>~<nl>
* probably makes the mud crash (vice versa as well) The cure
* would be to change act() so that vo becomes vict & v_obj.
* but this would require a lot of small changes all over the code.
*/
void mprog_translate( char ch, char *t, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm )
{
static char *he_she[] = { "it", "he", "she" };
static char *him_her[] = { "it", "him", "her" };
static char *his_her[] = { "its", "his", "her" };
CHAR_DATA *vict = ( CHAR_DATA * ) vo;
OBJ_DATA *v_obj = ( OBJ_DATA * ) vo;
*t = '\0';
switch ( ch )
{
case 'i':
one_argument( mob->name, t );
break;
case 'I':
strcpy( t, mob->short_descr );
break;
case 'n':
if( actor )
if( can_see( mob, actor ) )
one_argument( actor->name, t );
if( !IS_NPC( actor ) )
*t = UPPER( *t );
break;
case 'N':
if( actor )
{
if( can_see( mob, actor ) )
{
if( IS_NPC( actor ) )
strcpy( t, actor->short_descr );
else
{
strcpy( t, actor->name );
strcat( t, " " );
strcat( t, actor->pcdata->title );
}
}
}
else
strcpy( t, "someone" );
break;
case 't':
if( vict )
if( can_see( mob, vict ) )
one_argument( vict->name, t );
if( !IS_NPC( vict ) )
*t = UPPER( *t );
break;
case 'T':
if( vict )
{
if( can_see( mob, vict ) )
{
if( IS_NPC( vict ) )
strcpy( t, vict->short_descr );
else
{
strcpy( t, vict->name );
strcat( t, " " );
strcat( t, vict->pcdata->title );
}
}
}
else
strcpy( t, "someone" );
break;
case 'r':
if( rndm )
if( can_see( mob, rndm ) )
one_argument( rndm->name, t );
if( !IS_NPC( rndm ) )
*t = UPPER( *t );
break;
case 'R':
if( rndm )
{
if( can_see( mob, rndm ) )
{
if( IS_NPC( rndm ) )
strcpy( t, rndm->short_descr );
else
{
strcpy( t, rndm->name );
strcat( t, " " );
strcat( t, rndm->pcdata->title );
}
}
}
else
strcpy( t, "someone" );
break;
case 'e':
if( actor )
can_see( mob, actor ) ? strcpy( t, he_she[actor->sex] ) : strcpy( t, "someone" );
break;
case 'm':
if( actor )
can_see( mob, actor ) ? strcpy( t, him_her[actor->sex] ) : strcpy( t, "someone" );
break;
case 's':
if( actor )
can_see( mob, actor ) ? strcpy( t, his_her[actor->sex] ) : strcpy( t, "someone's" );
break;
case 'E':
if( vict )
can_see( mob, vict ) ? strcpy( t, he_she[vict->sex] ) : strcpy( t, "someone" );
break;
case 'M':
if( vict )
can_see( mob, vict ) ? strcpy( t, him_her[vict->sex] ) : strcpy( t, "someone" );
break;
case 'S':
if( vict )
can_see( mob, vict ) ? strcpy( t, his_her[vict->sex] ) : strcpy( t, "someone's" );
break;
case 'j':
strcpy( t, he_she[mob->sex] );
break;
case 'k':
strcpy( t, him_her[mob->sex] );
break;
case 'l':
strcpy( t, his_her[mob->sex] );
break;
case 'J':
if( rndm )
can_see( mob, rndm ) ? strcpy( t, he_she[rndm->sex] ) : strcpy( t, "someone" );
break;
case 'K':
if( rndm )
can_see( mob, rndm ) ? strcpy( t, him_her[rndm->sex] ) : strcpy( t, "someone" );
break;
case 'L':
if( rndm )
can_see( mob, rndm ) ? strcpy( t, his_her[rndm->sex] ) : strcpy( t, "someone's" );
break;
case 'o':
if( obj )
can_see_obj( mob, obj ) ? one_argument( obj->name, t ) : strcpy( t, "something" );
break;
case 'O':
if( obj )
can_see_obj( mob, obj ) ? strcpy( t, obj->short_descr ) : strcpy( t, "something" );
break;
case 'p':
if( v_obj )
can_see_obj( mob, v_obj ) ? one_argument( v_obj->name, t ) : strcpy( t, "something" );
break;
case 'P':
if( v_obj )
can_see_obj( mob, v_obj ) ? strcpy( t, v_obj->short_descr ) : strcpy( t, "something" );
break;
case 'a':
if( obj )
switch ( *( obj->name ) )
{
case 'a':
case 'e':
case 'i':
case 'o':
case 'u':
strcpy( t, "an" );
break;
default:
strcpy( t, "a" );
}
break;
case 'A':
if( v_obj )
switch ( *( v_obj->name ) )
{
case 'a':
case 'e':
case 'i':
case 'o':
case 'u':
strcpy( t, "an" );
break;
default:
strcpy( t, "a" );
}
break;
case '$':
strcpy( t, "$" );
break;
default:
bug( "Mob: %d bad $var", mob->pIndexData->vnum );
break;
}
return;
}
/* This procedure simply copies the cmnd to a buffer while expanding
* any variables by calling the translate procedure. The observant
* code scrutinizer will notice that this is taken from act()
*/
void mprog_process_cmnd( char *cmnd, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, CHAR_DATA * rndm )
{
char buf[MAX_INPUT_LENGTH];
char tmp[MAX_INPUT_LENGTH];
char *str;
char *i;
char *point;
point = buf;
str = cmnd;
while( *str != '\0' )
{
if( *str != '$' )
{
*point++ = *str++;
continue;
}
str++;
mprog_translate( *str, tmp, mob, actor, obj, vo, rndm );
i = tmp;
++str;
while( ( *point = *i ) != '\0' )
++point, ++i;
}
*point = '\0';
interpret( mob, buf );
return;
}
/* The main focus of the MOBprograms. This routine is called
* whenever a trigger is successful. It is responsible for parsing
* the command list and figuring out what to do. However, like all
* complex procedures, everything is farmed out to the other guys.
*/
void mprog_driver( char *com_list, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo )
{
char tmpcmndlst[MAX_STRING_LENGTH];
char buf[MAX_INPUT_LENGTH];
char *morebuf;
char *command_list;
char *cmnd;
CHAR_DATA *rndm = NULL;
CHAR_DATA *vch = NULL;
int count = 0;
if( IS_AFFECTED( mob, AFF_CHARM ) )
return;
/*
* get a random visable mortal player who is in the room with the mob
*/
for( vch = mob->in_room->people; vch; vch = vch->next_in_room )
if( !IS_NPC( vch ) && vch->level < LEVEL_IMMORTAL && can_see( mob, vch ) )
{
if( number_range( 0, count ) == 0 )
rndm = vch;
count++;
}
strcpy( tmpcmndlst, com_list );
command_list = tmpcmndlst;
cmnd = command_list;
command_list = mprog_next_command( command_list );
while( *cmnd != '\0' )
{
morebuf = one_argument( cmnd, buf );
if( !str_cmp( buf, "if" ) )
command_list = mprog_process_if( morebuf, command_list, mob, actor, obj, vo, rndm );
else
mprog_process_cmnd( cmnd, mob, actor, obj, vo, rndm );
cmnd = command_list;
command_list = mprog_next_command( command_list );
}
return;
}
/***************************************************************************
* Global function code and brief comments.
*/
/* The next two routines are the basic trigger types. Either trigger
* on a certain percent, or trigger on a keyword or word phrase.
* To see how this works, look at the various trigger routines..
*/
void mprog_wordlist_check( char *arg, CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, int type )
{
char temp1[MAX_STRING_LENGTH];
char temp2[MAX_INPUT_LENGTH];
char word[MAX_INPUT_LENGTH];
MPROG_DATA *mprg;
char *list;
char *start;
char *dupl;
char *end;
int i;
for( mprg = mob->pIndexData->mobprogs; mprg != NULL; mprg = mprg->next )
if( mprg->type & type )
{
strcpy( temp1, mprg->arglist );
list = temp1;
for( i = 0; i < strlen( list ); i++ )
list[i] = LOWER( list[i] );
strcpy( temp2, arg );
dupl = temp2;
for( i = 0; i < strlen( dupl ); i++ )
dupl[i] = LOWER( dupl[i] );
if( ( list[0] == 'p' ) && ( list[1] == ' ' ) )
{
list += 2;
while( ( start = strstr( dupl, list ) ) )
if( ( start == dupl || *( start - 1 ) == ' ' )
&& ( *( end = start + strlen( list ) ) == ' ' || *end == '\n' || *end == '\r' || *end == '\0' ) )
{
mprog_driver( mprg->comlist, mob, actor, obj, vo );
break;
}
else
dupl = start + 1;
}
else
{
list = one_argument( list, word );
for( ; word[0] != '\0'; list = one_argument( list, word ) )
while( ( start = strstr( dupl, word ) ) )
if( ( start == dupl || *( start - 1 ) == ' ' )
&& ( *( end = start + strlen( word ) ) == ' ' || *end == '\n' || *end == '\r' || *end == '\0' ) )
{
mprog_driver( mprg->comlist, mob, actor, obj, vo );
break;
}
else
dupl = start + 1;
}
}
return;
}
void mprog_percent_check( CHAR_DATA * mob, CHAR_DATA * actor, OBJ_DATA * obj, void *vo, int type )
{
MPROG_DATA *mprg;
for( mprg = mob->pIndexData->mobprogs; mprg != NULL; mprg = mprg->next )
if( ( mprg->type & type ) && ( number_percent( ) < atoi( mprg->arglist ) ) )
{
mprog_driver( mprg->comlist, mob, actor, obj, vo );
if( type != GREET_PROG && type != ALL_GREET_PROG )
break;
}
return;
}
/* The triggers.. These are really basic, and since most appear only
* once in the code (hmm. i think they all do) it would be more efficient
* to substitute the code in and make the mprog_xxx_check routines global.
* However, they are all here in one nice place at the moment to make it
* easier to see what they look like. If you do substitute them back in,
* make sure you remember to modify the variable names to the ones in the
* trigger calls.
*/
void mprog_act_trigger( char *buf, CHAR_DATA * mob, CHAR_DATA * ch, OBJ_DATA * obj, void *vo )
{
MPROG_ACT_LIST *tmp_act;
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & ACT_PROG ) )
{
tmp_act = alloc_mem( sizeof( MPROG_ACT_LIST ) );
if( mob->mpactnum > 0 )
tmp_act->next = mob->mpact->next;
else
tmp_act->next = NULL;
mob->mpact = tmp_act;
mob->mpact->buf = str_dup( buf );
mob->mpact->ch = ch;
mob->mpact->obj = obj;
mob->mpact->vo = vo;
mob->mpactnum++;
}
return;
}
void mprog_bribe_trigger( CHAR_DATA * mob, CHAR_DATA * ch, int amount )
{
char buf[MAX_STRING_LENGTH];
MPROG_DATA *mprg;
OBJ_DATA *obj;
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & BRIBE_PROG ) )
{
obj = create_object( get_obj_index( OBJ_VNUM_MONEY_SOME ), 0 );
sprintf( buf, obj->short_descr, amount );
free_string( obj->short_descr );
obj->short_descr = str_dup( buf );
obj->value[0] = amount;
obj_to_char( obj, mob );
mob->gold -= amount;
for( mprg = mob->pIndexData->mobprogs; mprg != NULL; mprg = mprg->next )
if( ( mprg->type & BRIBE_PROG ) && ( amount >= atoi( mprg->arglist ) ) )
{
mprog_driver( mprg->comlist, mob, ch, obj, NULL );
break;
}
}
return;
}
void mprog_death_trigger( CHAR_DATA * mob )
{
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & DEATH_PROG ) )
{
mprog_percent_check( mob, NULL, NULL, NULL, DEATH_PROG );
}
death_cry( mob );
return;
}
void mprog_entry_trigger( CHAR_DATA * mob )
{
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & ENTRY_PROG ) )
mprog_percent_check( mob, NULL, NULL, NULL, ENTRY_PROG );
return;
}
void mprog_fight_trigger( CHAR_DATA * mob, CHAR_DATA * ch )
{
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & FIGHT_PROG ) )
mprog_percent_check( mob, ch, NULL, NULL, FIGHT_PROG );
return;
}
void mprog_give_trigger( CHAR_DATA * mob, CHAR_DATA * ch, OBJ_DATA * obj )
{
char buf[MAX_INPUT_LENGTH];
MPROG_DATA *mprg;
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & GIVE_PROG ) )
for( mprg = mob->pIndexData->mobprogs; mprg != NULL; mprg = mprg->next )
{
one_argument( mprg->arglist, buf );
if( ( mprg->type & GIVE_PROG ) && ( ( !str_cmp( obj->name, mprg->arglist ) ) || ( !str_cmp( "all", buf ) ) ) )
{
mprog_driver( mprg->comlist, mob, ch, obj, NULL );
break;
}
}
return;
}
void mprog_greet_trigger( CHAR_DATA * mob )
{
CHAR_DATA *vmob;
for( vmob = mob->in_room->people; vmob != NULL; vmob = vmob->next_in_room )
if( IS_NPC( vmob )
&& mob != vmob
&& can_see( vmob, mob )
&& ( vmob->fighting == NULL ) && IS_AWAKE( vmob ) && ( vmob->pIndexData->progtypes & GREET_PROG ) )
mprog_percent_check( vmob, mob, NULL, NULL, GREET_PROG );
else
if( IS_NPC( vmob )
&& ( vmob->fighting == NULL ) && IS_AWAKE( vmob ) && ( vmob->pIndexData->progtypes & ALL_GREET_PROG ) )
mprog_percent_check( vmob, mob, NULL, NULL, ALL_GREET_PROG );
return;
}
void mprog_hitprcnt_trigger( CHAR_DATA * mob, CHAR_DATA * ch )
{
MPROG_DATA *mprg;
if( IS_NPC( mob ) && ( mob->pIndexData->progtypes & HITPRCNT_PROG ) )
for( mprg = mob->pIndexData->mobprogs; mprg != NULL; mprg = mprg->next )
if( ( mprg->type & HITPRCNT_PROG ) && ( ( 100 * mob->hit / mob->max_hit ) < atoi( mprg->arglist ) ) )
{
mprog_driver( mprg->comlist, mob, ch, NULL, NULL );
break;
}
return;
}
void mprog_random_trigger( CHAR_DATA * mob )
{
if( mob->pIndexData->progtypes & RAND_PROG )
mprog_percent_check( mob, NULL, NULL, NULL, RAND_PROG );
return;
}
void mprog_speech_trigger( char *txt, CHAR_DATA * mob )
{
CHAR_DATA *vmob;
for( vmob = mob->in_room->people; vmob != NULL; vmob = vmob->next_in_room )
if( IS_NPC( vmob ) && ( vmob->pIndexData->progtypes & SPEECH_PROG ) )
mprog_wordlist_check( txt, vmob, mob, NULL, NULL, SPEECH_PROG );
return;
}