/* tmp.c */
/* Author:
* Steve Kirkendall
* 14407 SW Teal Blvd. #C
* Beaverton, OR 97005
* kirkenda@cs.pdx.edu
*/
/* This file contains functions which create & readback a TMPFILE */
#include "config.h"
#include "vi.h"
#if TOS
# include <stat.h>
#else
# if OSK
# include "osk.h"
# else
# if AMIGA
# include "amistat.h"
# else
# include <sys/stat.h>
# endif
# endif
#endif
#if TURBOC
# include <process.h>
#endif
#ifndef NO_MODELINES
static void do_modelines(l, stop)
long l; /* line number to start at */
long stop; /* line number to stop at */
{
char *str; /* used to scan through the line */
char *start; /* points to the start of the line */
char buf[80];
/* if modelines are disabled, then do nothing */
if (!*o_modelines)
{
return;
}
/* for each line... */
for (; l <= stop; l++)
{
/* for each position in the line.. */
for (str = fetchline(l); *str; str++)
{
/* if it is the start of a modeline command... */
if ((str[0] == 'e' && str[1] == 'x'
|| str[0] == 'v' && str[1] == 'i')
&& str[2] == ':')
{
start = str += 3;
/* find the end */
for (str = start + strlen(start); *--str != ':'; )
{
}
/* if it is a well-formed modeline, execute it */
if (str > start && str - start < sizeof buf)
{
strncpy(buf, start, (int)(str - start));
exstring(buf, str - start, '\\');
break;
}
}
}
}
}
#endif
/* The FAIL() macro prints an error message and then exits. */
#define FAIL(why,arg) mode = MODE_EX; msg(why, arg); endwin(); exit(9)
/* This is the name of the temp file */
static char tmpname[80];
/* This function creates the temp file and copies the original file into it.
* Returns if successful, or stops execution if it fails.
*/
int tmpstart(filename)
char *filename; /* name of the original file */
{
int origfd; /* fd used for reading the original file */
struct stat statb; /* stat buffer, used to examine inode */
REG BLK *this; /* pointer to the current block buffer */
REG BLK *next; /* pointer to the next block buffer */
int inbuf; /* number of characters in a buffer */
int nread; /* number of bytes read */
REG int j, k;
int i;
long nbytes;
/* switching to a different file certainly counts as a change */
changes++;
redraw(MARK_UNSET, FALSE);
/* open the original file for reading */
*origname = '\0';
if (filename && *filename)
{
strcpy(origname, filename);
origfd = open(origname, O_RDONLY);
if (origfd < 0 && errno != ENOENT)
{
msg("Can't open \"%s\"", origname);
return tmpstart("");
}
if (origfd >= 0)
{
if (stat(origname, &statb) < 0)
{
FAIL("Can't stat \"%s\"", origname);
}
#if TOS
if (origfd >= 0 && (statb.st_mode & S_IJDIR))
#else
# if OSK
if (origfd >= 0 && (statb.st_mode & S_IFDIR))
# else
if (origfd >= 0 && (statb.st_mode & S_IFMT) != S_IFREG)
# endif
#endif
{
msg("\"%s\" is not a regular file", origname);
return tmpstart("");
}
}
else
{
stat(".", &statb);
}
if (origfd >= 0)
{
origtime = statb.st_mtime;
#if OSK
if (*o_readonly || !(statb.st_mode &
((getuid() >> 16) == 0 ? S_IOWRITE | S_IWRITE :
((statb.st_gid != (getuid() >> 16) ? S_IOWRITE : S_IWRITE)))))
#endif
#if AMIGA || MSDOS
if (*o_readonly || !(statb.st_mode & S_IWRITE))
#endif
#if TOS
# ifdef __GNUC__
if (*o_readonly || !(statb.st_mode & S_IWRITE))
# else
if (*o_readonly || (statb.st_mode & S_IJRON))
# endif
#endif
#if ANY_UNIX
if (*o_readonly || !(statb.st_mode &
((geteuid() == 0) ? 0222 :
((statb.st_uid != geteuid() ? 0022 : 0200)))))
#endif
#if VMS
if (*o_readonly)
#endif
{
setflag(file, READONLY);
}
}
else
{
origtime = 0L;
}
}
else
{
setflag(file, NOFILE);
origfd = -1;
origtime = 0L;
stat(".", &statb);
}
/* make a name for the tmp file */
do
{
tmpnum++;
#if MSDOS || TOS
/* MS-Dos doesn't allow multiple slashes, but supports drives
* with current directories.
* This relies on TMPNAME beginning with "%s\\"!!!!
*/
strcpy(tmpname, o_directory);
if ((i = strlen(tmpname)) && !strchr(":/\\", tmpname[i-1]))
tmpname[i++]=SLASH;
sprintf(tmpname+i, TMPNAME+3, getpid(), tmpnum);
#else
sprintf(tmpname, TMPNAME, o_directory, getpid(), tmpnum);
#endif
} while (access(tmpname, 0) == 0);
/* !!! RACE CONDITION HERE - some other process with the same PID could
* create the temp file between the access() call and the creat() call.
* This could happen in a couple of ways:
* - different workstation may share the same temp dir via NFS. Each
* workstation could have a process with the same number.
* - The DOS version may be running multiple times on the same physical
* machine in different virtual machines. The DOS pid number will
* be the same on all virtual machines.
*
* This race condition could be fixed by replacing access(tmpname, 0)
* with open(tmpname, O_CREAT|O_EXCL, 0600), if we could only be sure
* that open() *always* used modern UNIX semantics.
*/
/* create the temp file */
#if ANY_UNIX
close(creat(tmpname, 0600)); /* only we can read it */
#else
close(creat(tmpname, FILEPERMS)); /* anybody body can read it, alas */
#endif
tmpfd = open(tmpname, O_RDWR | O_BINARY);
if (tmpfd < 0)
{
FAIL("Can't create temp file... Does directory \"%s\" exist?", o_directory);
return 1;
}
/* allocate space for the header in the file */
if (write(tmpfd, hdr.c, (unsigned)BLKSIZE) < BLKSIZE
|| write(tmpfd, tmpblk.c, (unsigned)BLKSIZE) < BLKSIZE)
{
FAIL("Error writing headers to \"%s\"", tmpname);
}
#ifndef NO_RECYCLE
/* initialize the block allocator */
/* This must already be done here, before the first attempt
* to write to the new file! GB */
garbage();
#endif
/* initialize lnum[] */
for (i = 1; i < MAXBLKS; i++)
{
lnum[i] = INFINITY;
}
lnum[0] = 0;
/* if there is no original file, then create a 1-line file */
if (origfd < 0)
{
hdr.n[0] = 0; /* invalid inode# denotes new file */
this = blkget(1); /* get the new text block */
strcpy(this->c, "\n"); /* put a line in it */
lnum[1] = 1L; /* block 1 ends with line 1 */
nlines = 1L; /* there is 1 line in the file */
nbytes = 1L;
if (*origname)
{
msg("\"%s\" [NEW FILE] 1 line, 1 char", origname);
}
else
{
msg("\"[NO FILE]\" 1 line, 1 char");
}
}
else /* there is an original file -- read it in */
{
nbytes = nlines = 0;
/* preallocate 1 "next" buffer */
i = 1;
next = blkget(i);
inbuf = 0;
/* loop, moving blocks from orig to tmp */
for (;;)
{
/* "next" buffer becomes "this" buffer */
this = next;
/* read [more] text into this block */
nread = tread(origfd, &this->c[inbuf], BLKSIZE - 1 - inbuf);
if (nread < 0)
{
close(origfd);
close(tmpfd);
tmpfd = -1;
unlink(tmpname);
FAIL("Error reading \"%s\"", origname);
}
/* convert NUL characters to something else */
for (j = k = inbuf; k < inbuf + nread; k++)
{
if (!this->c[k])
{
setflag(file, HADNUL);
this->c[j++] = 0x80;
}
#ifndef CRUNCH
else if (*o_beautify && this->c[k] < ' ' && this->c[k] >= 1)
{
if (this->c[k] == '\t'
|| this->c[k] == '\n'
|| this->c[k] == '\f')
{
this->c[j++] = this->c[k];
}
else if (this->c[k] == '\b')
{
/* delete '\b', but complain */
setflag(file, HADBS);
}
/* else silently delete control char */
}
#endif
else
{
this->c[j++] = this->c[k];
}
}
inbuf = j;
/* if the buffer is empty, quit */
if (inbuf == 0)
{
goto FoundEOF;
}
#if MSDOS || TOS
/* BAH! MS text mode read fills inbuf, then compresses eliminating \r
but leaving garbage at end of buf. The same is true for TURBOC. GB. */
memset(this->c + inbuf, '\0', BLKSIZE - inbuf);
#endif
/* search backward for last newline */
for (k = inbuf; --k >= 0 && this->c[k] != '\n';)
{
}
if (k++ < 0)
{
if (inbuf >= BLKSIZE - 1)
{
k = 80;
}
else
{
k = inbuf;
}
}
/* allocate next buffer */
if (i >= MAXBLKS - 2)
{
FAIL("File too big. Limit is approx %ld kbytes.", MAXBLKS * BLKSIZE / 1024L);
}
next = blkget(++i);
/* move fragmentary last line to next buffer */
inbuf -= k;
for (j = 0; k < BLKSIZE; j++, k++)
{
next->c[j] = this->c[k];
this->c[k] = 0;
}
/* if necessary, add a newline to this buf */
for (k = BLKSIZE - inbuf; --k >= 0 && !this->c[k]; )
{
}
if (this->c[k] != '\n')
{
setflag(file, ADDEDNL);
this->c[k + 1] = '\n';
}
/* count the lines in this block */
for (k = 0; k < BLKSIZE && this->c[k]; k++)
{
if (this->c[k] == '\n')
{
nlines++;
}
nbytes++;
}
lnum[i - 1] = nlines;
}
FoundEOF:
/* if this is a zero-length file, add 1 line */
if (nlines == 0)
{
this = blkget(1); /* get the new text block */
strcpy(this->c, "\n"); /* put a line in it */
lnum[1] = 1; /* block 1 ends with line 1 */
nlines = 1; /* there is 1 line in the file */
nbytes = 1;
}
#if MSDOS || TOS
/* each line has an extra CR that we didn't count yet */
nbytes += nlines;
#endif
/* report the number of lines in the file */
msg("\"%s\" %s %ld line%s, %ld char%s",
origname,
(tstflag(file, READONLY) ? "[READONLY]" : ""),
nlines,
nlines == 1 ? "" : "s",
nbytes,
nbytes == 1 ? "" : "s");
}
/* initialize the cursor to start of line 1 */
cursor = MARK_FIRST;
/* close the original file */
close(origfd);
/* any other messages? */
if (tstflag(file, HADNUL))
{
msg("This file contained NULs. They've been changed to \\x80 chars");
}
if (tstflag(file, ADDEDNL))
{
msg("Newline characters have been inserted to break up long lines");
}
#ifndef CRUNCH
if (tstflag(file, HADBS))
{
msg("Backspace characters deleted due to ':set beautify'");
}
#endif
storename(origname);
#ifndef NO_MODELINES
if (nlines > 10)
{
do_modelines(1L, 5L);
do_modelines(nlines - 4L, nlines);
}
else
{
do_modelines(1L, nlines);
}
#endif
/* force all blocks out onto the disk, to support file recovery */
blksync();
return 0;
}
/* This function copies the temp file back onto an original file.
* Returns TRUE if successful, or FALSE if the file could NOT be saved.
*/
int tmpsave(filename, bang)
char *filename; /* the name to save it to */
int bang; /* forced write? */
{
int fd; /* fd of the file we're writing to */
REG int len; /* length of a text block */
REG BLK *this; /* a text block */
long bytes; /* byte counter */
REG int i;
/* assume the original file name */
filename = origname;
/* if still no file name, then fail */
if (!*filename)
{
msg("You need to specify a filename at the command prompt");
return FALSE;
}
/* can't rewrite a READONLY file */
if (!strcmp(filename, origname) && tstflag(file, READONLY) && !bang)
{
msg("\"%s\" [READONLY] -- NOT WRITTEN", filename);
return FALSE;
}
/* open the file */
if (*filename == '>' && filename[1] == '>')
{
filename += 2;
while (*filename == ' ' || *filename == '\t')
{
filename++;
}
#ifdef O_APPEND
fd = open(filename, O_WRONLY|O_APPEND);
#else
fd = open(filename, O_WRONLY);
lseek(fd, 0L, 2);
#endif
}
else
{
/* either the file must not exist, or it must be the original
* file, or we must have a bang, or "writeany" must be set.
*/
if (strcmp(filename, origname) && access(filename, 0) == 0 && !bang
#ifndef CRUNCH
&& !*o_writeany
#endif
)
{
msg("File already exists - Use :w! to overwrite");
return FALSE;
}
#if VMS
/* Create a new VMS version of this file. */
{
char *strrchr(), *ptr = strrchr(filename,';');
if (ptr) *ptr = '\0'; /* Snip off any ;number in the name */
}
#endif
fd = creat(filename, FILEPERMS);
}
if (fd < 0)
{
msg("Can't write to \"%s\" -- NOT WRITTEN", filename);
return FALSE;
}
/* write each text block to the file */
bytes = 0L;
for (i = 1; i < MAXBLKS && (this = blkget(i)) && this->c[0]; i++)
{
for (len = 0; len < BLKSIZE && this->c[len]; len++)
{
}
if (twrite(fd, this->c, len) < len)
{
msg("Trouble writing to \"%s\"", filename);
if (!strcmp(filename, origname))
{
setflag(file, MODIFIED);
}
close(fd);
return FALSE;
}
bytes += len;
}
/* reset the "modified" flag, but not the "undoable" flag */
clrflag(file, MODIFIED);
significant = FALSE;
if (!strcmp(origname, filename))
{
exitcode &= ~1;
}
/* report lines & characters */
#if MSDOS || TOS
bytes += nlines; /* for the inserted carriage returns */
#endif
msg("Wrote \"%s\" %ld lines, %ld characters", filename, nlines, bytes);
/* close the file */
close(fd);
return TRUE;
}
/* This function deletes the temporary file. If the file has been modified
* and "bang" is FALSE, then it returns FALSE without doing anything; else
* it returns TRUE.
*
* If the "autowrite" option is set, then instead of returning FALSE when
* the file has been modified and "bang" is false, it will call tmpend().
*/
int tmpabort(bang)
int bang;
{
/* if there is no file, return successfully */
if (tmpfd < 0)
{
return TRUE;
}
/* see if we must return FALSE -- can't quit */
if (!bang && tstflag(file, MODIFIED))
{
/* if "autowrite" is set, then act like tmpend() */
if (*o_autowrite)
return tmpend(bang);
else
return FALSE;
}
/* delete the tmp file */
cutswitch();
strcpy(prevorig, origname);
prevline = markline(cursor);
*origname = '\0';
origtime = 0L;
blkinit();
nlines = 0;
initflags();
return TRUE;
}
/* This function saves the file if it has been modified, and then deletes
* the temporary file. Returns TRUE if successful, or FALSE if the file
* needs to be saved but can't be. When it returns FALSE, it will not have
* deleted the tmp file, either.
*/
int tmpend(bang)
int bang;
{
/* save the file if it has been modified */
if (tstflag(file, MODIFIED) && !tmpsave((char *)0, FALSE) && !bang)
{
return FALSE;
}
/* delete the tmp file */
tmpabort(TRUE);
return TRUE;
}
/* If the tmp file has been changed, then this function will force those
* changes to be written to the disk, so that the tmp file will survive a
* system crash or power failure.
*/
#if AMIGA || MSDOS || TOS
sync()
{
/* MS-DOS and TOS don't flush their buffers until the file is closed,
* so here we close the tmp file and then immediately reopen it.
*/
close(tmpfd);
tmpfd = open(tmpname, O_RDWR | O_BINARY);
return 0;
}
#endif
/* This function stores the file's name in the second block of the temp file.
* SLEAZE ALERT! SLEAZE ALERT! The "tmpblk" buffer is probably being used
* to store the arguments to a command, so we can't use it here. Instead,
* we'll borrow the buffer that is used for "shift-U".
*/
int
storename(name)
char *name; /* the name of the file - normally origname */
{
#ifndef CRUNCH
int len;
char *ptr;
#endif
/* we're going to clobber the U_text buffer, so reset U_line */
U_line = 0L;
if (!name)
{
strncpy(U_text, "", BLKSIZE);
U_text[1] = 127;
}
#ifndef CRUNCH
# if TOS || MINT || MSDOS || AMIGA
else if (*name != '/' && *name != '\\' && !(*name && name[1] == ':'))
# else
else if (*name != SLASH)
# endif
{
/* get the directory name */
ptr = getcwd(U_text, BLKSIZE);
if (ptr != U_text)
{
strcpy(U_text, ptr);
}
/* append a slash to the directory name */
len = strlen(U_text);
U_text[len++] = SLASH;
/* append the filename, padded with heaps o' NULs */
strncpy(U_text + len, *name ? name : "foo", BLKSIZE - len);
}
#endif
else
{
/* copy the filename into U_text */
strncpy(U_text, *name ? name : "foo", BLKSIZE);
}
if (tmpfd >= 0)
{
/* write the name out to second block of the temp file */
lseek(tmpfd, (long)BLKSIZE, 0);
if (write(tmpfd, U_text, (unsigned)BLKSIZE) < BLKSIZE)
{
FAIL("Error stuffing name \"%s\" into temp file", U_text);
}
}
return 0;
}
/* This function handles deadly signals. It restores sanity to the terminal
* preserves the current temp file, and deletes any old temp files.
*/
SIGTYPE deathtrap(sig)
int sig; /* the deadly signal that we caught */
{
char *why;
/* restore the terminal's sanity */
endwin();
#ifdef CRUNCH
why = "-Elvis died";
#else
/* give a more specific description of how Elvis died */
switch (sig)
{
# ifdef SIGHUP
case SIGHUP: why = "-the modem lost its carrier"; break;
# endif
# ifndef DEBUG
# ifdef SIGILL
case SIGILL: why = "-Elvis hit an illegal instruction"; break;
# endif
# ifdef SIGBUS
case SIGBUS: why = "-Elvis had a bus error"; break;
# endif
# ifdef SIGSEGV
# if !TOS
case SIGSEGV: why = "-Elvis had a segmentation violation"; break;
# endif
# endif
# ifdef SIGSYS
case SIGSYS: why = "-Elvis munged a system call"; break;
# endif
# endif /* !DEBUG */
# ifdef SIGPIPE
case SIGPIPE: why = "-the pipe reader died"; break;
# endif
# ifdef SIGTERM
case SIGTERM: why = "-Elvis was terminated"; break;
# endif
# if !MINIX
# ifdef SIGUSR1
case SIGUSR1: why = "-Elvis was killed via SIGUSR1"; break;
# endif
# ifdef SIGUSR2
case SIGUSR2: why = "-Elvis was killed via SIGUSR2"; break;
# endif
# endif
default: why = "-Elvis died"; break;
}
#endif
/* if we had a temp file going, then preserve it */
if (tmpnum > 0 && tmpfd >= 0)
{
close(tmpfd);
sprintf(tmpblk.c, "%s \"%s\" %s", PRESERVE, why, tmpname);
system(tmpblk.c);
}
/* delete any old temp files */
cutend();
/* exit with the proper exit status */
exit(sig);
}